Adaptor anchors the housing
The 3/4-14 NPT adaptor enters the machine case and establishes the fixed outer connection for the assembly.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 31000-28-05-20-033-01-02 31000 Proximity Probe Housing Assembly |
| Item NO. | 2943254 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 31000-28-05-20-033-01-02 is a 31000 proximity probe housing assembly configured for a 3300 XL 8 mm probe with the multiple-approval option. The housing mounts at the machine case, the stainless-steel probe sleeve positions the probe toward the target, and the enclosure contains the cable connection while allowing external conduit or cable-gland entry.
The installation geometry of 31000-28-05-20-033-01-02 combines a 0.5 m probe cable, 2.0 in standoff and 3.3 in penetration. Its 01 conduit selection provides one 3/4-14 NPT explosion-proof fitting and two plugs, while the final 02 selects a 3/4-14 NPT mounting adaptor for the housing-to-machine interface.
The PPS housing body and 304 stainless-steel sleeve of 31000-28-05-20-033-01-02 form an IP66/Type 4X enclosure assembly. The adjustable sleeve establishes probe depth before the retainer and cover close the enclosure; installations with a combined standoff and penetration above 12 in require sleeve support.
| Attribute | 31000-28-05-20-033-01-02 |
|---|---|
| Brand | Bently Nevada |
| Product name | 31000 proximity probe housing assembly |
| Probe option | 28, 3300 XL 8 mm with multiple approvals |
| Probe cable length | 0.5 m |
| Standoff length | 2.0 in |
| Penetration length | 3.3 in |
| Conduit fittings | One 3/4-14 NPT explosion-proof fitting and two plugs |
| Mounting adaptor | 3/4-14 NPT |
| Housing material | Polyphenylene sulfide |
| Probe sleeve material | 304 stainless steel |
| Ingress protection | Type 4X / IP66 |
| Typical mass | 1.2 kg |
| Sleeve support rule | Required above 12 in combined length |
The mounting adaptor, outer sleeve and adjustable probe sleeve each control a different boundary.
The 3/4-14 NPT adaptor enters the machine case and establishes the fixed outer connection for the assembly.
The stainless-steel sleeve passes through the retaining nut and carries the probe toward the target while maintaining enclosure organization.
The probe is moved inside the sleeve to establish the electrical gap before the cable is reconnected and the housing cover is secured.
The 0.5 m probe lead returns into the enclosure, where connection and cable exit are kept away from the target side.
The integral lead enters the housing with enough route to reach the connector while the probe remains fixed in the sleeve.
The selected 3/4-14 NPT fitting provides the conduit boundary; unused enclosure holes are closed with the supplied plugs.
The retained cover and captive screws close the PPS body after the internal connector and cable route are checked.
If the standoff plus penetration used by 31000-28-05-20-033-01-02 exceeds 12 in, the sleeve must be supported.
31000-28-05-20-033-01-02 uses a 2.0 in standoff and 3.3 in penetration.
Set the probe depth and gap, reconnect the internal cable joint, secure the retainer and confirm plugs and fittings before fastening the cover of 31000-28-05-20-033-01-02.
The 28 field configures 31000-28-05-20-033-01-02 for a 3300 XL 8 mm probe with the multiple-approval option.
Option 01 supplies one 3/4-14 NPT explosion-proof fitting and two plugs on 31000-28-05-20-033-01-02.
The final 02 field of 31000-28-05-20-033-01-02 selects the 3/4-14 NPT mounting adaptor.
Moore Automation Limited supports enquiries across established PLC, DCS, drive, instrumentation and machinery-monitoring manufacturers. The team records the requested brand and full model on each line, allowing mixed-brand projects to share one contact without losing item-level identity.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found