AC conversion
80026-529-01-R converts the single-phase control supply to the drive's 56 V DC control-power level.
POWERFLEX 700056V
Allen-Bradley 80026-529-01-R 56 V DC AC/DC Power Supply
529-01-R1000 W SUPPLY
Product Description
Allen-Bradley 80026-529-01-R is a 1000 W single-phase AC/DC power supply listed for the PowerFlex 7000 drive. Its regulated output is 56 V DC and forms part of the drive control-power distribution.
A PowerFlex 7000 installation can use multiple AC/DC supply units in the control-power arrangement. The drive monitors the AC input and the 56 V DC output associated with the 80026-529-01-R, producing an AC-fail condition when the input falls below 85 V rms and a DC-fail condition when the output falls below 49 V DC.
Troubleshooting around the 80026-529-01-R separates the incoming control voltage from the outgoing 56 V DC path. The defined checks include the supply input, DC output, fault wiring, fan operation and the connections that route 56 V DC toward the isolated gate-driver power supplies.
Technical Specifications
| Technical Item | 80026-529-01-R |
|---|---|
| Brand | Allen-Bradley |
| Product Type | AC/DC power supply |
| Brand Country | United States |
| Drive Family | PowerFlex 7000 |
| Input | Single-phase AC |
| Output | 56 V DC |
| Power Rating | 1000 W |
| AC-Fail Threshold | Below 85 V rms |
| DC-Fail Threshold | Below 49 V DC |
| Monitored Path | 56 V DC control-power output |
| Service Checks | Input, output, fault wiring and fan |
56 VDC Control-Power Path
Distribution point
The 56 V DC output is routed through the drive control circuitry toward the isolated gate-driver supplies.
Multiple-supply arrangements
PowerFlex 7000 configurations can contain more than one AC/DC supply, so the specific supply path must be traced before testing.
AC/DC Failure Monitoring
The PowerFlex 7000 monitors both sides of the 80026-529-01-R conversion path.
AC-fail logic
Input below 85 V rms is treated as an AC supply failure.
DC-fail logic
Output below 49 V DC is treated as a DC supply failure.
Fault isolation
Comparing input voltage, 56 V output and downstream connection readings separates supply loss from a wiring or load-side problem.
Frequently Asked Questions
What output does 80026-529-01-R provide?
It provides a regulated 56 V DC output at a 1000 W rating. The unit is listed as a single-phase AC/DC supply for PowerFlex 7000 control power.
What causes an AC-fail indication around 80026-529-01-R?
The monitored input is considered failed when it falls below 85 V rms. Check the incoming control voltage and upstream protection before replacing the supply.
What causes a DC-fail indication around 80026-529-01-R?
The drive reports the DC side as failed when the supply output falls below 49 V DC. Measure the output and examine downstream connections or loading.
Why can PowerFlex 7000 troubleshooting show 56 V at 80026-529-01-R but no gate power downstream?
A correct source reading does not prove the rest of the distribution path. Compare the defined control-board test point with the isolated gate-driver supply input and inspect the intervening connections.
What physical checks apply to 80026-529-01-R?
Verify seated input and output wiring, the fault connection and fan operation. Follow the drive safety procedure before accessing the control-power compartment.
Can 80026-529-01-R be diagnosed only from the alarm name?
No. The input threshold, DC output and downstream distribution readings must be separated so the failed section is identified.
Moore Automation Quality & Warranty
Incoming identity and visible condition are checked before industrial spare parts are packed for shipment.
Catalog-number check
Visible condition review
Protective packaging
One-year warranty
www.mvme.cn
Recommended Industrial Automation Products
B&RX20DI9753
Bosch RexrothHCS03.1E-W0280-A-05-NNBV
FoxboroFBM201
GEIC670MDL241
HoneywellCC-MCAR01
MotorolaMVME147-012
ProSoftMVI56-PDPMV1
Siemens6ES7288-2DR32-0AA0
YokogawaADV151-P60/D5A00
Bently Nevada330130-030-00-00
ABBIMMFP12
Allen-Bradley1734-OE4C
B&RX20DO2322
Bosch RexrothHCS03.1E-W0350-A-05-NNBV
FoxboroP0914SQ
GEIC670MDL330
HoneywellCC-TAOX01
MotorolaMVME147-012A
ProSoftPLX32-EIP-MBTCP-UA
Siemens6ES7288-2DT32-0AA0
YokogawaAAV144-SK0
Bently Nevada330130-035-00-05
ABBNTAI05
Allen-Bradley1734-IE2C
B&RX20DO2623
Bosch RexrothHMS01.1N-W0020-A-07-NNNN
FoxboroRH914SQ
GEIC670MDL331
HoneywellCC-TDIL01
MotorolaMVME147-022
ProSoftPLX82-EIP-61850
Siemens6ES7288-2QR16-0AA0
YokogawaPW482-50
Bently Nevada330130-040-03-00
ABBSPFEC12
Allen-Bradley1734-OE2C
B&RX20DO4321
Bosch RexrothHMS01.1N-W0036-A-07-NNNN
FoxboroRH916XG
GEIC670MDL640
HoneywellCC-TDIL10
MotorolaMVME147-022A
ProSoftPLX51-PBM
Siemens6ES7288-2QT16-0AA0
YokogawaAFV30D-A41262
Bently Nevada330130-045-00-05
ABBIMFEC12
Allen-Bradley1734-OE2V
B&RX20DO4322
Bosch RexrothHMS01.1N-W0210-A-07-NNNN
FoxboroFBM214B
GEIC670MDL641
HoneywellCC-HCN911
MotorolaMVME147-023
ProSoftPLX31-EIP-MBS4
Siemens6ES7288-3AE04-0AA0
YokogawaAAI835-S50/K4A00
Bently Nevada330130-070-00-05
ABBIMHSS03
Allen-Bradley1734-IR2
No related record found