Welcome to Moore Automation Limited

0
Loadding...
 

sales@mvme.cn    Phone: +86 18030175807

Home>ABB>ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module
ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module

ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module Item NO.: 2931900

Write a Review
US$ 1.00
Quantity
Stock ( 28 )

Copy and share this link on social network or send it to your friends

Copy
Request Price & AvailabilitySend the part number and quantity. Our team will confirm stock, condition, lead time and the best quotation.
  • MOQ: 1 piece
  • International shipping
  • 1-year warranty on eligible items
  • Fast response during business hours
Product Name ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module
Item NO. 2931900
Weight 0.1 kg = 0.2205 lb = 3.5274 oz
Category ABB
Brand ABB
Creation Time 2026-11-11

ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module
ABBAC500-XC V3

ABB PM5650-2ETH-XC 1SAP341000R0378 AC500-XC V3 Processor Module

Hardware revisionR0378
01
Controller identity

Product Details

ABB PM5650-2ETH-XC 1SAP341000R0378 is an AC500-XC V3 processor module with an integrated LCD and eight operating keys. It provides the control and communication resources for a centrally expanded station, where as many as ten I/O modules or 320 I/O points can be arranged through the matching AC500 terminal-base system.

Across its communication section, PM5650-2ETH-XC 1SAP341000R0378 provides two independent Ethernet interfaces, one configurable RS232/RS485 serial interface and one CAN interface. The Ethernet ports can operate as a switch and support controller functions that include Modbus TCP and MQTT, while additional licensed or configured services cover EtherNet/IP, KNX, BACnet, IEC 60870-5-104, DNP3 and IEC 61850.

Program execution in PM5650-2ETH-XC 1SAP341000R0378 is supported by 80 MB of total user program memory, including 4 MB assigned to user-program code and data. ABB lists a minimum cycle time of 0.010 microseconds for bit, word and floating-point instructions, and the optional memory card provides a local medium for program and data handling.

For the R0378 hardware revision, PM5650-2ETH-XC 1SAP341000R0378 requires Automation Builder 2.6.0 or later together with firmware 3.6.0 or later; ABB states that this revision cannot be downgraded below that firmware level. The processor is used with a TB56xx-2ETH-XC terminal base and belongs to the AC500-XC family intended for demanding temperature, vibration, humidity, corrosion and altitude conditions.

02
Technical record

Product Specifications

Specification PM5650-2ETH-XC 1SAP341000R0378
Brand ABB
Product Name AC500-XC V3 Processor Module
Country Not specified
Series AC500-XC V3
Supply voltage 24 V DC
Total user program memory 80 MB
User program code and data 4 MB
Minimum cycle time 0.010 / 0.010 / 0.010 µs for bit / word / floating-point instructions
Ethernet interfaces 2 independent interfaces; switch operation supported
Serial interface 1 × RS232/RS485 configurable; ASCII or Modbus RTU Master/Slave
CAN interface 1 × CAN; CANopen Master, CAN 2A/2B and J1939
Local operation LCD and 8 function keys
Terminal base TB56xx-2ETH-XC
Weight 0.137 kg
03
Integrated networks

Communication Architecture

01

Dual Ethernet plane

The two Ethernet interfaces are independently addressable and can also be arranged as a switch. This gives the processor a local path for programming, visualization or plant-network traffic without consuming the serial or CAN connection.

02

Configurable COM1

The integrated COM1 channel is selected as RS232 or RS485 and is configured for ASCII communication or Modbus RTU Master/Slave operation. Electrical mode, baud rate, framing and node role are therefore treated as one documented interface setting.

03

CAN services

The internal CAN interface supports CANopen Master as well as CAN 2A/2B and J1939 communication. Bus topology, termination and node parameters remain part of the network design rather than properties inferred from the connector alone.

04
Engineering baseline

Configuration and Runtime

01

Engineering baseline

Hardware revision R0378 starts at Automation Builder 2.6.0 and firmware 3.6.0. Keeping the project archive at or above that baseline prevents the engineering station from presenting an unsupported downgrade path.

02

Program resources

The controller provides 80 MB of total user program memory, with 4 MB identified for user-program code and data. The optional memory card adds a removable location for supported program and data operations.

03

Local diagnostics

The LCD and eight function keys provide a direct status and diagnostic surface at the cabinet. Central expansion supports up to ten I/O modules or 320 I/O points when the station is assembled on the specified AC500-XC terminal-base family.

05
Practical checks

Questions & Answers

Why will an older Automation Builder project not accept PM5650-2ETH-XC 1SAP341000R0378 R0378?

PM5650-2ETH-XC 1SAP341000R0378 in hardware revision R0378 requires Automation Builder 2.6.0 or later and firmware 3.6.0 or later. Update the engineering environment and preserve a verified project backup before attempting the hardware configuration.

Can both Ethernet ports on PM5650-2ETH-XC 1SAP341000R0378 be used as a simple network switch?

PM5650-2ETH-XC 1SAP341000R0378 supports switch operation across its two Ethernet interfaces, but the project must still define IP addressing, protocol roles and any required licences. Check the configured services before joining two plant segments.

What should be checked when the serial device does not communicate with PM5650-2ETH-XC 1SAP341000R0378?

For PM5650-2ETH-XC 1SAP341000R0378, confirm whether COM1 is set for RS232 or RS485, then match ASCII or Modbus RTU role, baud rate, framing, node address and RS485 termination to the connected device.

Why can a CAN node remain offline even though PM5650-2ETH-XC 1SAP341000R0378 is powered?

PM5650-2ETH-XC 1SAP341000R0378 supports several CAN services, so the selected CANopen, CAN 2A/2B or J1939 configuration must match the field nodes. Inspect bus termination, cable polarity, bitrate and duplicate node addresses before changing the controller program.

Which terminal base should be paired with PM5650-2ETH-XC 1SAP341000R0378?

ABB specifies PM5650-2ETH-XC 1SAP341000R0378 for use with the TB56xx-2ETH-XC terminal-base family. Confirm the complete base label and the two-Ethernet XC suffix rather than selecting a base from appearance alone.

How can the front panel help when PM5650-2ETH-XC 1SAP341000R0378 stops running the application?

Use the LCD and eight keys on PM5650-2ETH-XC 1SAP341000R0378 to record controller state and diagnostic messages, then compare those indications with Automation Builder diagnostics, communication status and the preserved project version.

06
Automation sourcing

Company Profile

Moore Automation

https://www.mvme.cn

Moore Automation works with industrial automation records across PLC, DCS, HMI, drive and instrumentation families. For this ABB controller enquiry, the complete processor identity, hardware revision and terminal-base requirement can be kept together from quotation through receiving.

The team coordinates stock records, label evidence, packing notes and shipment visibility for both current and hard-to-find automation components. A dedicated contact keeps the technical and commercial record aligned without shortening the requested catalog number.

Multi-brand component sourcingExact label and revision reviewPacking record coordinationShipment visibility
07
Mixed-brand selection

Suggested Products

Siemens 3RH1921-1FA40
Motorola MVME147
ABB 2N1408
Rockwell Automation 20F11ND011JA0NNNNN
Allen-Bradley 25A-D2P3N104
GE 4136J57-G01
TRICONEX 3101
Rockwell Drives 80026-044-06-R
Bently Nevada 31000-16-10-00-050-03-02
Beckhoff AX5103-0000
Omron CP1W-40EDT
Phoenix Contact MCR-SL-PT100-LP-NC
Foxboro RH924ZQ
Allen-Bradley PanelView 20-HIM-A3
Vibro-Meter MPC4 200-510-041-021
Emerson PR6423-002-030 + CON021
WAGO 2001-1207
Woodward 9902-406
ADLEE AS2-115
ANYBUS 021620-B
FMS EMGZ306A
KUHNKE KUAX671 671.022.16
NSK ESA-Y2020TF1-11
Santak 730-80141-00P
TP-Link TL-FC311A-3
TR Electronic CEV65M-01460
TR-Electronic CEV58M-00337
Yaskawa SJDE-08ANA-0Y
Siemens 3RK1304-5KS40-4AA0
Motorola MVME147-001
ABB 3HAA3563-AMA
Rockwell Automation 20F11ND034JA0NNNNN
Allen-Bradley 25A-D6P0N104
GE 4136J58-G01
TRICONEX 3101S2
Rockwell Drives 80190-220-01-R
Bently Nevada 3701/40 177896-05
Beckhoff CX5130-0115
Omron NX100
Phoenix Contact MCR-SL-PT100-U-DC-24
Foxboro RH927BN
Allen-Bradley PanelView 20-HIM-A6
Vibro-Meter MPC4 200-510-071-113
Emerson SE4304T01 / KL3022X1-BA1
WAGO 280-572
Woodward RB5 / UG-10
Siemens 3RP2525-1BW30
Motorola MVME147-010
ABB 3HAB8413-1
Rockwell Automation 20F11ND065JA0NNNNN
Allen-Bradley 25B-A2P5N104
GE 4161J28-G03
TRICONEX 3201
Rockwell Drives 80190-299-01/9
Bently Nevada 3701/40 177988-01
Beckhoff KL3062
Omron OS32C-CBSP1
Phoenix Contact PLC-BPT-230UC/21
Foxboro RH928CV
Allen-Bradley PanelView 22-HIM-C2S
08
Direct enquiry

Contact Details

Sales ManagerLeonia

No related record found

You May Also Like

Copyright © 2004–2026 www.mvme.cn. All rights reserved.

Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.