Maintain the controller-side electronic path
ABB 3HNA024855-001 is the MCB-02B board record used in the paint-robot electronic group. Its connectors and board position carry signals within the installed cabinet/manipulator arrangement.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | ABB 3HNA024855-001 / 3HNA024941-001 MCB-02B Board and PTPU-02 Paint Teach Pendant |
| Item NO. | 2940221 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | ABB |
| Brand | ABB |
| Creation Time | 2026-11-17 |
Two IRC5P paint-system hardware identities with different installation roles
ABB 3HNA024855-001 is the MCB-02B electronic board listed in ABB paint-robot spare-parts documentation. The article appears in the IRB 5510 electronic-board group and supersedes the earlier MCB-02B articles 3HNA018575-001 and 3HNA014018-001.
ABB 3HNA024941-001 is the PTPU-02 Paint Teach Pendant. ABB identifies 3HNA012283-001 as the older replaced article and states that holder 3HNA026009-001 is required when PTPU-02 replaces a PTPU-01 installation.
ABB 3HNA024855-001 / 3HNA024941-001 connect to the IRC5P paint platform at different points: MCB-02B belongs to the controller/manipulator electronics record, while PTPU-02 is the handheld operator interface. Their connectors, mounting and replacement histories are not shared.
| Specification | 3HNA024855-001 | 3HNA024941-001 |
|---|---|---|
| Brand | ABB | ABB |
| Product type | MCB-02B electronic board | PTPU-02 Paint Teach Pendant |
| System family | Paint robot electronic-board group | IRC5P paint robot controller |
| Installation role | Controller/manipulator electronics | Handheld operator interface |
| Primary function | MCB-02B board role | Programming and operator control |
| Earlier IDs | 3HNA018575-001; 3HNA014018-001 | 3HNA012283-001 |
| Replacement direction | Current MCB-02B article | Replaces PTPU-01 article |
| Associated hardware | Matched cabinet cables and board position | Holder 3HNA026009-001 when replacing PTPU-01 |
| Order unit | 1 piece | 1 piece |
| Country record | China | China |
| Identity evidence | Board label, connectors and cabinet position | Pendant label, cable connector and holder |
| Interchangeability limit | Board revision and cabinet documentation | Pendant generation and holder arrangement |
The MCB-02B board and the PTPU-02 pendant divide internal paint-controller processing from direct operator interaction, giving each article a distinct role in the IRC5P hardware path.
ABB 3HNA024855-001 is the MCB-02B board record used in the paint-robot electronic group. Its connectors and board position carry signals within the installed cabinet/manipulator arrangement.
ABB 3HNA024941-001 is the PTPU-02 Paint Teach Pendant. The device presents controls and status to the operator through its own cable and connector path.
The board can be present without proving which pendant generation is installed, and the pendant label does not identify the MCB-02B board revision. Each functional path needs its own evidence.
Integration depends on the exact cabinet position for the MCB-02B board and the pendant-generation, cable and holder arrangement for the PTPU-02 interface.
For ABB 3HNA024855-001, the board label, keyed connectors, surrounding cables and installed slot establish the MCB-02B path. Earlier MCB-02B identifiers remain useful when the cabinet record predates the current article.
For ABB 3HNA024941-001, the transition from 3HNA012283-001 includes the documented holder 3HNA026009-001. The pendant, connector and holder therefore form one physical integration record.
After installation, verify the controller-side board communication and the pendant interaction as separate checks. A working PTPU-02 does not by itself prove the MCB-02B position or cable set is correct.
For ABB 3HNA024855-001 / 3HNA024941-001, compare an older MCB-02B label with 3HNA018575-001 and 3HNA014018-001, then record the cabinet slot and connectors. Do not use the pendant article to resolve the board identity.
For ABB 3HNA024855-001 / 3HNA024941-001, a PTPU-01-to-PTPU-02 change also requires attention to holder 3HNA026009-001. Confirm the holder and connector arrangement before treating the new pendant as a direct physical swap.
For ABB 3HNA024855-001 / 3HNA024941-001, handle 3HNA024855-001 as an electronic board using the site ESD procedure and protective packaging, while recording 3HNA024941-001 as a complete handheld device with its cable and holder.
Before quoting ABB 3HNA024855-001 / 3HNA024941-001, provide the MCB-02B label, both connector edges and cabinet position, plus the pendant label, plug, cable condition and installed holder.
For ABB 3HNA024855-001 / 3HNA024941-001, keep cabinet-board symptoms separate from pendant cable, plug and holder symptoms. Record which interface loses communication before assigning the fault to either 3HNA024855-001 or 3HNA024941-001.
Receiving for ABB 3HNA024855-001 / 3HNA024941-001 should verify two line items: the correct MCB-02B board article and connector layout, and the complete PTPU-02 pendant article with the associated holder requirement noted.
Moore Automation coordinates enquiries for control-system hardware, operator interfaces, PLC and DCS components, drives and condition-monitoring parts. Brand and model details are retained as supplied so different hardware roles remain visible.
Service support can include quotation preparation, available-document coordination, packing notes and shipment tracking. These commercial steps are organized around the customer record rather than presented as technical certification.
| Rockwell Automation 1761-NET-AIC | GE IC695CMM004 | Siemens 6DL1131-6BL00-0PH1 | ABB ACS580-01-206A-4 |
| Rockwell Automation 1761-NET-ENI | GE IC695CMX128 | Siemens 6ES5465-4UA13 | ABB ACS880-01-017A-3 |
| Rockwell Automation 1772-LP1 | GE IC695CPE302 | Siemens 6ES7193-1FL50-0XA0 | ABB ACS880-01-025A-3 |
| Rockwell Automation 1772-LP2 | GE IC695CPE305 | Siemens 6GK5202-2JR00-2BA6 | ABB ACS880-01-032A-3 |
| Rockwell Automation 1772-LP3 | GE IC695CPE310 | Siemens 6SL3544-0FB21-1PA0 | ABB ACS880-01-045A-3 |
| Rockwell Automation 1772-M16 | GE IC695CPE400 | Siemens 7MH4601-1AA01 | ABB ACS880-01-061A-3 |
| Rockwell Automation 1772-M8 | GE IC695CPS400 | ABB ACS880-01-087A-3 | Rockwell Automation 1772-ME |
| GE IC695CPU310 | ABB ACS880-01-105A-3 | Rockwell Automation 1772-P1 | GE IC695CPU315 |
| ABB ACS880-01-145A-3 | Rockwell Automation 1773-L1A | GE IC695CRU320 | ABB ACS880-01-169A-3 |
| Rockwell Automation 1773-L1B | GE IC695ECM850 | ABB ACS880-01-206A-3 | Rockwell Automation 1775-KA |
| GE IC695GCG001 | ABB CI854AK01 | Rockwell Automation 1775-L4 | GE IC695NIU001 |
| ABB DI810 | Rockwell Automation 1775-LP8 | GE IC695PBS301 | Rockwell Automation 1775-LPA |
| GE IC695PNC001 | Rockwell Automation 1775-ME4 | GE IC695PNS101 | Rockwell Automation 1775-ME8 |
| GE IC695RMX128 | Rockwell Automation 1775-MEAA | GE IC695RMX228 | Rockwell Automation 1775-MEF |
| GE IC755CKW07CDM | Rockwell Automation 1775-P1 | GE IC755CKW10CDM | Rockwell Automation 1775-S4A |
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found