Manipulator interface hardware documented for the IRC5P purge-system boundary
01
Product Overview
ABB 3HNA030713-001 is a manipulator interface board identified as MIB in ABB IRC5P purge-system documentation. The board forms part of the purge-controller hardware boundary that connects manipulator-side purge signals with the controller arrangement.
ABB 3HNA030713-001 is the current replacement article recorded for the earlier MIB-01 product 3HNA006145-001. That replacement path preserves the MIB function while changing the orderable article identity.
ABB 3HNA030713-001 also appears on purge-controller identification labels used with the documented ATEX/FM system variants. The complete board label, purge-system variant and controller documentation therefore define the product more precisely than the MIB abbreviation alone.
02
Technical Specifications
Specification
3HNA030713-001
Brand
ABB
Product type
Manipulator interface board
Type designation
MIB
System context
IRC5P purge system
Hardware role
Purge-controller manipulator interface
Replacement status
Current replacement article
Earlier article
3HNA006145-001
Earlier description
MIB-01
Installation evidence
Board label and purge-controller position
Variant evidence
ATEX or FM purge-system record
Signal boundary
Manipulator-side purge interfaces
Selection boundary
Complete article, board revision and system documentation
03
Product Functions
The MIB board provides the electrical interface between the IRC5P controller hardware and manipulator-side purge equipment, keeping purge-related status and control signals within a defined system boundary.
Bridge controller and manipulator purge hardware
ABB 3HNA030713-001 occupies the manipulator-interface position in the IRC5P purge arrangement. Its connector paths allow the controller hardware to exchange the purge-related signals assigned to that board position.
Carry purge condition information
The MIB role includes the signal boundary used by the purge system to represent manipulator-side conditions to the controller. This function depends on the surrounding purge hardware and cannot be inferred from a loose board alone.
Keep outputs within the certified arrangement
Control actions associated with the purge system remain governed by the matching IRC5P purge documentation and installed variant. The board article is one component in that larger protected-system architecture.
04
System Integration
Integration is based on the installed controller variant, exact MIB position, keyed connectors and purge-system documentation rather than on the appearance of an earlier interface board.
CONTROLLER CONTEXT
Identify the IRC5P purge variant first
For ABB 3HNA030713-001, record the controller identity and whether the installed purge arrangement follows the applicable certified variant. That system label defines the documentation boundary for wiring and safety.
BOARD POSITION
Map the exact connector and cable path
The cabinet location, connector keys and cable destinations establish how ABB 3HNA030713-001 joins the controller and manipulator purge hardware. Photos should show these relationships before any cable is moved.
REPLACEMENT RECORD
Use the old MIB-01 number only as a trace
ABB records 3HNA006145-001 as an earlier MIB-01 article replaced by ABB 3HNA030713-001. The old number helps locate legacy documentation, but the current article and installed system evidence control the final record.
05
Frequently Asked Questions
What should be done when the cabinet label shows MIB-01 instead of ABB 3HNA030713-001?
For ABB 3HNA030713-001, retain the visible MIB-01 article 3HNA006145-001 as the legacy reference, then document the controller variant, board slot and connector layout before using the replacement relationship.
Can a product photo of the old board prove fit for ABB 3HNA030713-001?
No. A photo of the earlier MIB-01 does not prove fit for ABB 3HNA030713-001. Use the current article record together with the installed IRC5P purge variant, keyed connectors, cable destinations and cabinet position.
Which safety record belongs with ABB 3HNA030713-001?
ABB 3HNA030713-001 should remain linked to the matching IRC5P purge-system manual and installed certification variant. The board article alone does not replace the wiring, purge and hazardous-area instructions for the complete controller arrangement.
How should cables be recorded before removing ABB 3HNA030713-001?
Before removing ABB 3HNA030713-001, label each connector, photograph both connector faces and cable destinations, and record the cabinet slot. This preserves the manipulator-to-controller signal map for reassembly.
What if purge status remains absent after ABB 3HNA030713-001 is installed?
If purge status remains absent after ABB 3HNA030713-001 installation, verify the documented system wiring, connector seating, cable identity and external purge hardware under the applicable safety procedure before assuming the replacement board is incorrect.
What information should be sent with an ABB 3HNA030713-001 enquiry?
An ABB 3HNA030713-001 enquiry should include the current and old board labels, controller and purge-variant labels, cabinet-position photographs, connector details and the exact system document or drawing used at the site.
Moore Automation provides a structured contact point for automation-component enquiries that may involve current, discontinued or scarce articles. The commercial record can retain both current and former manufacturer numbers when the source documentation shows a replacement relationship.
Customers can submit the manufacturer, full model, quantity, destination and available label photographs. The response can then coordinate model review, quotation information, packing notes and shipment status.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found