Field landing
The module provides the physical terminal positions where the field cable cores are landed and identified.
WOODWARDINDUSTRIAL TURBINE CONTROL · 5453-754
MICRONET · FIELD TERMINATION · CABINET WIRING
Woodward 5453-754 MicroNet Field Termination Module
TERMINAL BREAKOUT · CHANNEL GROUPING · RACK I/O
01 // A CONTENT
Product Description
Woodward 5453-754 is a MicroNet field termination module that provides the cabinet-side termination point between field conductors and the associated MicroNet I/O wiring. It belongs to the termination hardware used to keep field wiring organized at the rack boundary.
At the cabinet, Woodward 5453-754 receives the field-side conductors on its terminal positions and routes the assigned signals toward the matching MicroNet I/O interface. The terminal labels, common points and cable direction must remain aligned with the I/O module and the installed wiring schedule.
A field signal entering Woodward 5453-754 lands at the cabinet terminal, shares the defined common connection and leaves through the assigned MicroNet I/O cable toward the rack module.
02 // ENGINEERING DATA
Technical Data
| Technical Item | Specification |
|---|---|
| Brand | Woodward |
| Product type | MicroNet field termination module |
| Model | 5453-754 |
| System | MicroNet control system |
| Primary role | Field-side terminal interface |
| Signal direction | Field conductors to associated I/O wiring |
| Mounting boundary | Cabinet termination area |
| Connection boundary | Terminal labels and common points are wiring-specific |
| Partner hardware | Assigned MicroNet I/O interface |
| Commissioning focus | Continuity, channel labels and cable routing |
| MicroNet chassis interface | VME motherboard connection in the assigned MicroNet rack |
| Field wiring boundary | Analog/discrete I/O cables connect the module faceplate to an FTM |
| Power architecture | MicroNet Plus uses designated PS1 and PS2 power-supply positions |
| Environmental wiring limit | Use field wiring rated for at least 80 °C where expected ambient exceeds 55 °C |
| Termination role | Cabinet-side field termination between field conductors and MicroNet I/O cable |
| Cable boundary | FTM-to-I/O cable remains matched to the assigned I/O module and wiring schedule |
03 // TERMINATION DUTY
Product Functions
Woodward 5453-754 organizes the field-side conductors that feed the associated MicroNet I/O channels.
Signal handoff
Woodward 5453-754 passes the assigned conductors toward the matching I/O wiring rather than processing the signal itself.
Common management
Terminal labels and common points keep the channel group traceable from the cabinet entry to the I/O interface.
04 // CABINET WIRING PATH
Installation Highlights
The useful installation boundary for Woodward 5453-754 is the relationship between field cable entry, terminal labels and the matching MicroNet I/O module.
Cable entry
Route the field cable to the termination side identified in the cabinet schedule and preserve the conductor order.
I/O partner
Connect the outgoing side to the MicroNet I/O interface assigned to the module; a generic rack connection is not sufficient.
Continuity check
Verify each channel and common from the field terminal to the I/O point before energizing the rack.
05 // FIELD QUESTIONS
Product Q&A
Where should the field cable land on Woodward 5453-754?
Land each conductor on the terminal position assigned by the cabinet wiring schedule, then carry the matching side to the associated MicroNet I/O interface. Do not use an unlabelled terminal position as a substitute for the documented channel.
Can Woodward 5453-754 be wired to any MicroNet I/O module?
Use it only with the I/O interface and terminal arrangement assigned to the installation. The termination module routes conductors; it does not convert an incompatible signal type.
What causes an open-channel alarm after wiring Woodward 5453-754?
Check conductor continuity, terminal torque and the common connection before changing the I/O configuration. A broken or shifted core can interrupt the path while the module itself remains seated.
How should a spare cable pair be handled at Woodward 5453-754?
Keep unused cores identified and isolated according to the cabinet wiring practice. Do not bridge a spare pair into a common terminal to clear a diagnostic indication.
Can Woodward 5453-754 be replaced without recording the terminal map?
No; record each channel, common and outgoing cable position first. The replacement must preserve the same field-to-I/O relationship, not merely the same mounting location.
What should be checked after moving Woodward 5453-754 to another cabinet position?
Recheck cable length, terminal labels and the associated I/O slot, then run continuity checks. A physical move changes the routing boundary even if the module number is unchanged.
06 // CUSTOMER SUPPORT
Customer Support
MOORE AUTOMATION
https://www.mvme.cn/
Customer support for Woodward termination references starts with the exact cabinet-side model and requested quantity, then keeps the cable and I/O assignment visible through the enquiry.
Exact terminal modelCable recordI/O assignmentQuantity confirmation
www.mvme.cn
07 // CROSS-BRAND SELECTION
Recommended Products
| EmersonPR9268-302-100 | MotorolaMVME162-222 | Bosch RexrothHCS03.1E-W0280-A-05-NNBV |
| YokogawaPW482-50 | Siemens6ES7288-3AE08-0AA0 | HIMAF3 DIO 20/8 02 |
| FoxboroFBM202 | Bosch RexrothDKC03.3-040-7-FW | B&RX20AI2632 |
| ABB Robotics3HAC031184-003 | Siemens6ES7215-1AF40-0XB0 | HIMAF8640 |
| Allen-Bradley1734-IE8C | YokogawaSDV144-S5C/B4S10 | FoxboroRH914TN |
| HIMAX-CPU 01 | TRICONEX8107X | YokogawaAAI543-S50/K4A00 |
| EmersonPR9268-301-100 | ProSoftMVI69-MCM | Bently Nevada330101-00-08-05-02-05 |
| Vibro-meterCMC16 | HIMAF2 DO 16 01 | FoxboroRH924YA |
| Bosch RexrothDKC01.1-040-7-FW | B&RX20AT4222 | ABB3HAC029031-009 |
| B&RX20CP1585 | Bently Nevada3500/15 106M1079-01 | FoxboroP0914SY |
| Vibro-meterTQ902 | TRICONEX4701X | HIMAF6217 |
| MotorolaMVME147-010 | Vibro-meterTQ403 | Allen-Bradley1734-OE4C |
| EmersonPR9268-201-100 | Siemens6ES7288-2DE16-0AA0 | B&RX20DI2377 |
| Siemens6ES7288-2DR32-0AA0 | FoxboroFBM207 | Bosch RexrothHMS01.1N-W0350-A-07-NNNN |
| B&RX20DO8331 | ABB3HAC030211-001 | Vibro-meterIQS453 |
| ABB Robotics3HAC043569-004 | Siemens6ES7288-1ST20-0AA1 | Bosch RexrothDKC10.3-040-7-FW |
| Bently Nevada330105-02-12-10-02-00 | ICS TriplexT8403C | HoneywellFC-UGAO01 |
| Siemens6ES7288-1ST60-0AA1 | Woodward8440-1809 | Bently Nevada330130-070-00-05 |
| FoxboroFBM214B | Siemens6ES7288-2DE08-0AA0 | B&RX20DO9321 |
| ProSoftAN-X2-AB-DHRIO | EmersonA6220 | B&RX20DO4321 |
Enquiry Information
Include the complete Woodward model and requested quantity so the enquiry remains tied to the correct configuration.
ManagerLeonia · Moore Automation
Emailsales@mvme.cn
WhatsApp+86 180 3017 5807
No related record found