Product Information

Meggitt Vibro-Meter RPS6U 200-582-300-013 is a VM600 rack power-supply module. It occupies the supply position in the rack and provides the regulated rails needed by the installed VM600 monitoring, protection and interface cards.

The RPS6U 200-582-300-013 supply is part of the rack power path rather than a signal-processing card. Its output rails are distributed through the rack backplane, where the controller, measurement and relay modules receive the voltages required by their circuits.

RPS6U 200-582-300-013 feeds the rack distribution used by the installed controller, interface, measurement and relay modules. Its input connector, supply rails and backplane distribution form one continuous power path inside the VM600 rack.

Technical Data

Technical item	Specification
Brand	Meggitt Vibro-Meter
Product type	VM600 rack power-supply module
Product family	RPS6U
Part number	200-582-300-013
System	VM600
Rack role	Power conversion and distribution
Output path	VM600 rack backplane
Connected hardware	Installed VM600 cards
Electrical role	Supply module, not signal input
Installation	VM600 system rack supply position
Power path	Input source to regulated rack rails
Nominal output rails	+5 V up to 50 A; +12 V up to 8 A; −12 V up to −4 A
Maximum output	330 W
Ripple/noise	<50 mV peak-to-peak, 20 MHz bandwidth
Line regulation	<±1%
Load regulation	<±1% at +5 V; <±2% at ±12 V
Supported input families	115/230 VAC (or 220 VDC), 24 VDC, and 110 VDC versions
AC input range	90–132 VAC and 180–264 VAC; 178–264 VDC option
DC input ranges	18–32 VDC (24 V version) or 80–145 VDC (110 V version)
AC frequency	47–63 Hz
Efficiency	83–85% typical, version dependent
Inrush	<10× nominal input current
Factory adjustment	+5.41 V ±0.02 V; ±12.5 V ±0.05 V
Load range	+5.35 V at 3–50 A; +12.5 V 0–8 A; −12.5 V 0–4 A
Rack temperature note	Output derating or forced cooling applies at ≥50°C

Operating Characteristics: Rack Supply Path

RPS6U 200-582-300-013 supplies the rack rails used by the installed VM600 cards.

Input side

The defined input source enters the RPS6U supply module.

Conversion stage

The power-supply electronics produce the regulated rack rails.

Distribution side

The backplane distributes those rails to the controller, interface and measurement cards.

Diagnostics and Protection: Supply Status

RPS6U 200-582-300-013 is monitored as a rack supply element, so a supply issue can affect several cards at once.

Rack symptom

A missing rack rail can appear as a fault across multiple installed modules.

Card distinction

The RPS6U supply path is separate from the signal-processing path of the cards.

Cabinet check

The supply connector, rack distribution and card population are reviewed as one power path.

Product Questions

What does RPS6U 200-582-300-013 power?

RPS6U 200-582-300-013 powers the installed VM600 rack cards through the rack distribution path. It is not a measurement or relay card.

Where should the supply path of RPS6U 200-582-300-013 be traced?

Trace the input connector into RPS6U 200-582-300-013, then follow the regulated rails to the rack backplane and the installed module positions.

Why can several VM600 cards show a fault when RPS6U 200-582-300-013 has a supply problem?

RPS6U 200-582-300-013 feeds the rack distribution used by several modules, so one supply-path fault can remove the rail needed by multiple cards.

Does RPS6U 200-582-300-013 process vibration or relay signals?

No. RPS6U 200-582-300-013 provides rack power; vibration, relay and communications functions belong to the installed VM600 cards connected to its distribution path.

What should be documented with RPS6U 200-582-300-013?

Record the complete RPS6U PNR, rack position, input arrangement and the VM600 card population supplied by RPS6U 200-582-300-013.

How can a technician separate a rack-power issue from a card issue on RPS6U 200-582-300-013?

Check the RPS6U input and rack distribution first, then inspect the individual card path. This separates a common supply fault from a single-module fault.

Obsolete Parts Support

Moore Automation

https://www.mvme.cn/

Moore Automation receives enquiries for mature VM600 and VM600Mk2 hardware using the complete supplied identifier.

Mature hardwareA full card, rack, relay or transducer string is retained so a family name does not replace the specific requested record.

Full identifierA full card, rack, relay or transducer string is retained so a family name does not replace the specific requested record.

Direct responseA full card, rack, relay or transducer string is retained so a family name does not replace the specific requested record.

www.mvme.cn

Product Name	Meggitt Vibro-Meter RPS6U 200-582-300-013 \| VM600 rack power-supply module
Item NO.	2919908
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	VIBRO METER
Brand	OTHER PRODUCTS
Creation Time	2026-10-15

Meggitt Vibro-Meter RPS6U 200-582-300-013 | VM600 rack power-supply module Item NO.: 2919908

Meggitt Vibro-Meter RPS6U 200-582-300-013 | VM600 rack power-supply module