TC810R1024
Intelligent addressable relay module providing dry-contact control for auxiliary equipment through a compatible fire alarm control system.
Selective dry-contact control from the addressable loop
Honeywell TC810R1024 provides an addressable dry-contact output for activating fans, dampers, control equipment and other auxiliary devices. The relay can be activated manually or through panel programming on a selected zone or area basis.
Loop-powered electronics
Internal circuitry and relay power are supplied directly by the two-wire SLC loop.
Visible operating state
The panel-controlled LED indicates communication and relay activation status.
Direct addressing
Two rotary switches provide direct-dial address entry for FlashScan and CLIP operation.
From panel command to auxiliary action
Low loop demand. Flexible relay output.
Average operating current in direct-poll mode.
2 Form-CDry contacts operate together for a coordinated relay action.
Addressable auxiliary control
Door holders
Air handling unit shutdown
Fans and dampers
Control equipment
Four-wire smoke detector power reset
Addressable relay functional diagram
The diagram identifies the product-level signal path: SLC communication and power enter the addressable electronics, the panel command operates the relay, and the paired Form-C contacts provide dry-contact switching to field equipment.
Official Discontinuation & Replacement Info
Request TC810R1024 availability
Send the required quantity, destination and existing panel information for a focused quotation.
TC810R1024 procurement and installation questions
What function does Honeywell TC810R1024 provide?
TC810R1024 supplies an intelligent addressable dry-contact output for selectively operating auxiliary equipment through the fire alarm control panel.
How many relay contacts are available on TC810R1024?
TC810R1024 provides two Form-C dry contacts that switch together.
Which address ranges does TC810R1024 support?
TC810R1024 supports addresses 01–159 on FlashScan loops and 01–99 in CLIP mode.
Can TC810R1024 mount in a standard electrical box?
Yes. The module mounts to a 4-inch square box with a depth of 2.125 inches; SMB500 is the optional surface-mount backbox.
What must be checked before replacing TC810R1024?
Verify the fire panel, SLC protocol, address programming, relay contact ratings, field wiring, mounting arrangement and commissioning requirements because no designated one-for-one replacement is published.
Industrial automation and monitoring index
| ANMA213V2 | H3-5068X03 | 7101063006W |
| SRD-91 | INF-1001 | VAZ-2FK-G10-BRIDGE |
| LEM-3 | MIC-1000 | INBIO460 |
| WR3910-894 | DM5240 | PCX924 |
| WLP150H | VROM-160 | D59B |
| PT220-256L-DNET | S2403-0030 | ULX1-R4 |
| E70-24MCW-FW | CP81 | MSR142RTP |
| 440R-G23215 | ADCDW2506TU | TC10 |
| 60HH-S | XY2CE2A296 | EY-IO550F001 |
| RX7S-24 | IN1608 | M150/10-14-10 |
| RS2B | KU-12.25-12.75 | R0F1314228/5 |
| TVM113-013 | X13760335-01 | EXP-1048 |
| FW-325 | PCB/DIOS002 | BJ0002G2A |
| UFM-D05 | 1C334481 | REF.04813 |
| OBI302 | ECY-S1000 | EHS-220 |
| R0002 | NJS8477EN | 663AA002237 |
| PH300 | DLAF8000 | CAM301 |
| PRO/1000-F | A38888-002 | HS-6A |
| F.01U.118.902 | HWS600-24/LNT | HWS600-48/LNT |
| DM-TX-4K-302-C | UNC-500 | FS-B3510 |
No related record found