Choose X-DO 32 51
Use the 51 configuration when the project hardware list calls for group shut-off across the output arrangement.
HIMA · HIMAX OUTPUT HARDWARE
HIMA X-DO 32 51 Digital Output Module
X-DO 32 51 connects HIMax control logic to protected digital field outputs and uses group shut-off for its output configuration.
32DIGITAL OUTPUTS
Product Overview
HIMA X-DO 32 51 is a 32-channel digital output module for the HIMax control system. It transfers digital control commands from the HIMax rack to connected 24 V DC field devices.
The module combines protected outputs, a 0.5 A output rating and group shut-off in a 310 × 29 × 230 mm HIMax module. The complete 51 suffix distinguishes this configuration from other X-DO 32 variants.
Technical Specifications
| Product identification | |
|---|---|
| Brand | HIMA |
| Model | X-DO 32 51 |
| Product type | Digital output module |
| System family | HIMax |
| Output data | |
| Number of channels | 32 digital outputs |
| Nominal output voltage | 24 V DC |
| Output current | 0.5 A |
| Output characteristic | Protected outputs |
| Shut-off arrangement | Group shut-off |
| Mechanical data | |
| Module dimensions | 310 × 29 × 230 mm |
Signal Route
From control command to field output
Output commands enter X-DO 32 51 through the HIMax module connection and leave through the protected digital output stage.
The module is dedicated to field-output switching; it does not combine input acquisition or analog conversion in the same hardware item.
Variant Selection
Do not shorten the code
“X-DO 32” alone does not distinguish group shut-off from the individual-channel arrangement of X-DO 32 01.
Buyer Questions
Can HIMA X-DO 32 51 replace X-DO 32 01 without reviewing the shutdown design?
No. X-DO 32 51 uses group shut-off, while X-DO 32 01 uses individual-channel shut-off; the shutdown requirement must match before replacement.
Which hardware revision should be checked on a HIMA X-DO 32 51 label?
The X-DO 32 51 hardware entry uses revision 00, providing a precise label check for receiving inspection and spare matching.
Is HIMA X-DO 32 51 still listed as a valid HIMax device?
Yes. X-DO 32 51 revision 00 carries valid status in the HIMax device revision list.
How much module space should be allowed for HIMA X-DO 32 51?
Allow for a 310 × 29 × 230 mm module envelope, including the 29 mm installed width.
Which field load data must be checked before selecting HIMA X-DO 32 51?
Confirm that the load matches a protected 24 V DC digital output with the 0.5 A output-current value.
Recommended Models
| Selection A | Selection B | Selection C |
|---|---|---|
| Siemens 6SE7090-0XX84-0FA0 | Omron CP1W-40EDT1 | Yaskawa SGDL-A5AP |
| ABB CFQ557252340X001 | Allen-Bradley 800TC-PAH26B | Eaton F101 |
| GE 12SFC151D1A | Schneider Electric TSXSCY21600 | Yokogawa Y/11GM/Z |
| Omron CPM1A-30CDR-A-V1 | Honeywell TK-IDW161 | Woodward 9907-151 |
| Allen-Bradley 1492-EBJ3 | Mitsubishi Electric FX2N-422-BD | Bently Nevada 133292-01 |
| Schneider Electric BMXDDM16022 | WAGO 750-559 | Siemens 6ES7132-4BB31-0AB0 |
| Honeywell CC-PUIO01 | Yaskawa SGML-A5AF12 | ABB 3HNA007719-001 |
| Mitsubishi Electric FR-S520SE-0.2K-EC | Eaton MTL825 | GE 16SB1UB211LSM2C1 |
| WAGO 750-889 | Yokogawa TDLS200-D-X1-1-2 | Omron CP1L-L20DR-A |
| Yaskawa SGDV-MDA01E4ECA02 | Woodward 9907-205 | Allen-Bradley 1785-L60B/E |
| Eaton MTL4113P | Bently Nevada 31000 | Schneider Electric BMXEHC0800 |
| Yokogawa SAI143-H33/PRP | Siemens 6FX5002-5DG01-1BA0 | Honeywell 51304437-100 |
| Woodward 9907-173 | ABB BCR431952340X001 | Mitsubishi Electric QJ71C24-R2 |
| Bently Nevada 330525 | GE TAVT20 | WAGO 750-455 |
| ProSoft PLX31-EIP-MBS | Omron CPM2A-40CDR-A | Yaskawa SGDE-01AS |
| HIMA F3421 | Allen-Bradley 1771-NR | Eaton MTL4549Y |
| Motorola MVME162-522A | Schneider Electric 140XCP51000 | Yokogawa SSC50D-S2141 |
| Siemens 6ES7231-4HD32-0XB0 | Honeywell TK-PRR021 | Woodward 9907-162 |
| ABB 103-041-360-001 | Mitsubishi Electric AJ55TB32-8DT | Siemens 6SE6420-2UD22-2BA1 |
| GE 12IAC53B127A | WAGO 750-483 | ABB 1SDA115969R1 |
No related record found