GEINNOVATION SERIES FEEDBACK

Innovation Series Current Feedback Board

GE IS200IVFBG1A Innovation Series Current Feedback Board

Model Profile

GE IS200IVFBG1A is an Innovation Series current feedback board used in the load-cabinet feedback path of documented medium-voltage drive systems. The board record appears with the IS200IVSHG1A shield in the current-feedback assembly for the 2300 V, 18-pulse non-regenerative drive arrangement.

In the installed system, GE IS200IVFBG1A receives the designated current-feedback signals and presents them to the drive control path. The board is therefore identified by its exact assembly position, mating hardware and harness connections rather than by a generic current-sensing description.

Service work on GE IS200IVFBG1A follows the drive isolation procedure because the board belongs to a high-energy power-conversion cabinet. Connector labels, shield placement and the original board revision are recorded before any assembly is moved.

Technical Parameters

Technical item
Brand	GE
Model	IS200IVFBG1A
Product Name	Innovation Series current feedback board
Country	United States
System Family	Innovation Series drive
Documented Role	Current feedback interface
Documented Cabinet	Load cabinet
Documented Application	2300 V, 18-pulse non-regenerative drive arrangement
Associated Shield	IS200IVSHG1A
Signal Direction	Current feedback toward drive control
Identification Method	Exact board, shield and harness position
Installation State	Drive isolated and discharged
Connector Control	Label and record every harness before removal
Revision Control	Match full assembly and revision record

Monitoring and Control

GE IS200IVFBG1A carries current-feedback information from the drive power path into the control system, where it contributes to regulation and status evaluation. Monitoring quality depends on preserving the entire current-feedback chain, because a plausible but misrouted signal can be more dangerous than a clearly failed channel.

Feedback acquisition

The board receives the designated current-feedback signals from its installed cabinet assembly rather than directly switching power. Confirm that the current source, board input and control database point refer to the same phase and cabinet location before comparing values.

›

Control handoff

Conditioned feedback is presented to the drive control path so commanded operation can be compared with measured current behavior. Use controller diagnostics and measured operating behavior together; one alone cannot distinguish a sensor-path problem from a board or harness issue.

›

Record correlation

A valid measurement depends on the board, shield, harness and control-channel assignment describing the same physical path. Trend the restored feedback during a controlled test and stop if phase relationship, magnitude or response conflicts with the approved drive record.

System Integration

GE IS200IVFBG1A

GE IS200IVFBG1A is integrated as part of a defined load-cabinet assembly, not as a standalone universal feedback card. Integration is defined by assembly position, shield and harness relationships, so the board cannot be validated as a loose component outside that context.

Assembly position

The board location and IS200IVSHG1A shield belong together and should be photographed before removal. Photograph the installed board and IS200IVSHG1A shield together, including connector labels and fastener positions, before dismantling the assembly.

Harness identity

Every connector and cable label must return to the same feedback channel, because similar plugs do not prove signal equivalence. Return every harness to its recorded feedback channel and inspect shield contact so electrical noise is not introduced during reassembly.

Drive-level verification

After replacement, verify diagnostics and feedback plausibility under the approved drive commissioning procedure before applying process load. Restore control power first, clear diagnostics and verify feedback plausibility before the approved procedure permits process load.

Product Help

01Where is GE IS200IVFBG1A used?

GE IS200IVFBG1A is documented in the current-feedback assembly of the load cabinet for an Innovation Series medium-voltage drive arrangement.

02Is GE IS200IVFBG1A a power-switching board?

No. GE IS200IVFBG1A is identified as a current feedback board; it participates in measurement and control feedback rather than switching the main power path.

03What shield is associated with GE IS200IVFBG1A?

The documented GE IS200IVFBG1A assembly uses the IS200IVSHG1A shield; preserve that mechanical relationship during service.

04Can GE IS200IVFBG1A connectors be moved by appearance alone?

No. Label and record every GE IS200IVFBG1A harness because physical similarity does not establish equivalent feedback-channel assignment.

05What safety boundary applies to GE IS200IVFBG1A work?

GE IS200IVFBG1A belongs in a medium-voltage drive cabinet, so the complete approved isolation, discharge and verification procedure applies.

06How is GE IS200IVFBG1A checked after replacement?

After GE IS200IVFBG1A replacement, verify board recognition, diagnostics and plausible current feedback through the approved drive commissioning sequence.

Why Choose Moore Automation

Moore Automation

https://www.mvme.cn/

Moore Automation keeps industrial-part enquiries tied to the complete manufacturer and model while coordinating available documents and direct communication. The process avoids unsupported claims of authorization, stock or fixed delivery.

Clear referenceComplete product identity retained

Document coordinationAvailable records can follow

Careful wordingNo unsupported supply claim

Named contactOne route supports follow-up

Similar Products

MotorolaMVME2604-761

MotorolaMVME167-034B

GEIC630MDL311

MotorolaMVME61006E-0163R

ABB Robotics3HAC031580-001

MotorolaMVME2304-0133

FoxboroFBM207B

MotorolaMVME172PA-652SE

GEHE800MIX902

Rockwell Automation1756-L81EP

GEIS200EGPAG1B

ABBTB521-ETH

MotorolaMVME55006E-0163R

GEDS200TCCAG1B

GEIC200CPU001

MotorolaMVME5110-2263

GEIS200STAIH2A

GEDS200SNPAH1A

GE ExcitationDS3800NDAD1H1C

Bently NevadaRanger Pro 70M403

Rockwell Automation20F1ANC170JA0NNNNN

ABB Robotics3HAC033224-001

ABBPM5675-2ETH-XC

GEDS200EXPSG1ABB

GEIS220PDIOH1A

Rockwell Automation1783-ETAP3T

GEIC200UDD220

GEDS200CPCAG1A

GEDS200TBQGG1A

GEIS200EDEXG1B

Rockwell Drives80190-478-51

GEIS215UCVEH2B

GEIS200TPROH1C

ABB Robotics3HAC10939-6

ABBTU834

Rockwell Automation5069-L320ERMS2

GEIC3600SNCF1

Bently Nevada990-10-XX-01-00 / 165353-01

GEIS200EAUXH1A

GEHE800JCM205

Rockwell Automation2097-V33PR5-LM

MotorolaMVME147-001

EmersonKJ3241X1-BA1 + KJ3003X1-EA1

GEHE800ADC120

B&RX20CP0484-1

GEIS230SNAOH2A

GE ExcitationDS3800HSDD

GEIC200ALG266

Rockwell Automation1734-OB8S

GEIC630MDL376

ABB Robotics3HAC044504-001

Rockwell Automation1734-IB8S

Rockwell Automation1756-OB32E

GEHE800DIQ712

FoxboroFBM207C

GEIS215ACLEH1C

GEDS200QTBAG1A

ABB Robotics3HAC021455-001

ABB Robotics3HAC050308-003

GEIS200EDCFG1A

Sales Assistance

Moore Automation

Send the complete model and requested quantity.

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	GE IS200IVFBG1A Innovation Series Current Feedback Board
Item NO.	2929220
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	GE
Brand	GE
Creation Time	2026-11-02

GE IS200IVFBG1A Innovation Series Current Feedback Board Item NO.: 2929220

GE IS200IVFBG1A Innovation Series Current Feedback Board

Model Profile

Technical Parameters

Monitoring and Control

Feedback acquisition

Control handoff

Record correlation

System Integration

System Integration

Assembly position

Harness identity

Drive-level verification

Product Help

Why Choose Moore Automation

Moore Automation

Similar Products

Sales Assistance

Moore Automation

You May Also Like

Recently Viewed