GE IC755CSS12CDA QuickPanel+ 12-inch View and Control HMI
A panel-mounted operator interface combining a 12-inch multi-touch display, embedded computing, removable storage and industrial network connections.
Operator Interface and Control Platform
IC755CSS12CDA combines visualization and local control functions in the QuickPanel+ platform. Its 800 × 600 color TFT supports two-point projected-capacitive touch, while the embedded processor, volatile memory and flash storage run the configured operator application.
The terminal provides Ethernet, serial, USB, audio and SD/SDHC connections in one panel device. These interfaces support controller communications, removable project data and peripheral access without separating the display from its application runtime.
Hardware and Environmental Specifications
Computing and Display
Connections and Installation
Display, Runtime and Connection Roles
The application runtime links the operator screen to controller data through Ethernet or serial communications. USB and SD/SDHC media provide separate paths for peripherals and removable storage.
The tri-color status LED reports terminal state, while the Ethernet connector supplies link and activity indication for network checks.
Operator interface
SVGA visualization with two-point touch input.
Runtime platform
ARM Cortex-A8 processing with DDR3 and NAND storage.
External connections
Ethernet, RS-232, RS-485, USB and SD/SDHC interfaces.
Panel Fit and Installation Boundary
- Confirm the cutout is flat, correctly sized and free of damage.
- Seat the gasket evenly before the terminal enters the opening.
- Install the supplied panel brackets and secure the unit uniformly.
- Connect protective earth, 24 VDC power and the required communication cables.
IC755CSS12CDA
12-inch View and Control HMI with one Ethernet port.
IC755CSS12CDB
Review the application and interface boundary before migration.
FAQ
Does IC755CSS12CDA use the same panel opening as every 12-inch QuickPanel+?
Confirm the 302 × 228 mm cutout, the 314 × 248 × 65 mm enclosure and the condition of the mounting gasket before reusing an existing opening.
Which communication connections must be checked when replacing IC755CSS12CDA?
Record the single 10/100Base-T Ethernet connection and the 10-pin serial arrangement that provides RS-232 and RS-485. Existing serial cables must match that connector design.
What application data should be preserved before an IC755CSS12CDA changeover?
Archive the editable PAC Machine Edition project, target settings, network addresses, recipes and retained data before removing the terminal.
Can IC755CSS12CDB be fitted without reviewing the IC755CSS12CDA project?
No. IC755CSS12CDB is the documented successor, but the target, firmware, application functions, interfaces and panel installation still require confirmation.
How should IC755CSS12CDA be checked after power is restored?
Confirm the startup sequence, touch response, screen rendering, Ethernet link and activity indications, serial communications, alarm handling and retained-data behavior.
Industrial Parts Sourcing
Moore Automation coordinates enquiries for industrial automation components by exact brand and model identity. Requests may include current products as well as discontinued and hard-to-find parts.
No related record found