- All sixteen input points share the module group reference.
- The channel states are filtered and converted to serial data for the BIU.
- Two bytes represent the complete input image of the module.
GE Fanuc IC670MDL240 120 VAC Grouped Input Module
A sixteen-point 120 VAC grouped input module for high-density AC status acquisition.
Product Overview
GE Fanuc IC670MDL240 is a sixteen-point 120 VAC discrete input module arranged as one common group. It is used where a Field Control station must acquire a higher density of AC contact or sensor states from circuits that share the same field-power reference.
Input filtering and optical isolation separate the field group from the module logic. The sixteen states are transferred as two bytes of discrete input data, and individual LEDs show the buffered state seen by the bus interface unit.
The grouped construction differs from the isolated IC670MDL233. IC670MDL240 provides twice the point count, but it does not provide isolation between individual points within the group.
Technical Specifications
| Product type | Grouped discrete input module |
|---|---|
| Input points | 16 in one group |
| Rated voltage | 120 VAC |
| Input range | 0–132 VAC, 47–63 Hz |
| Input current | 15 mA per point at 120 VAC |
| On-state voltage | 70–120 VAC |
| Off-state voltage | 0–20 VAC |
| On response | 12 ms typical; 20 ms maximum |
| Off response | 25 ms typical; 40 ms maximum |
| Group-to-logic isolation | 250 VAC continuous |
| BIU current draw | 77 mA maximum |
Grouped Channel Arrangement
Density Versus Isolation
- IC670MDL240 is suited to common-supply AC circuits requiring sixteen points.
- Use IC670MDL233 when separate point isolation is required.
- Confirm shared-reference wiring before changing from an isolated-input design.
Buyer Questions
Can IC670MDL240 replace two IC670MDL233 modules?
Only if the field circuits may share one group reference; IC670MDL240 does not preserve point-to-point isolation.
What does a lit input LED on IC670MDL240 represent?
It represents the filtered state held in the module data buffer for that channel.
Why should leakage from AC sensors be checked with IC670MDL240?
The OFF state is specified only up to 20 VAC and 2.5 mA; excess leakage can prevent a reliable OFF indication.
How many controller input bytes does IC670MDL240 use?
Its sixteen discrete states occupy two input bytes.
What terminal information is needed for an IC670MDL240 spare?
Confirm whether the station uses a box, barrier or connector-style Field Control base.
Recommended Models
| Selection A | Selection B | Selection C |
|---|---|---|
| SICK CLV430-6010 | SEW-EURODRIVE MC07B0004-5A3-4-00/FSC11B | Moxa EDS-516A |
| Beckhoff BK6034 B-5L-A-4L | Phoenix Contact QUINT-PS/3AC/24DC/20 | ifm IF0303 |
| SEW-EURODRIVE MDX60A0055-5A3-4-00 | Moxa EDS-405A-MM-SC-T | Festo MSQB30H3 |
| Phoenix Contact QUINT-PS/1AC/12DC/15 | ifm IA5150A-T | Knick P42100 D3-0176 / P42100D30176 |
| Moxa EDS-619-T | Festo MSQB20H2 | ABB 1SAP140500R0271 PM585-ETH |
| ifm KI9822A | Knick B13000 F1 | Siemens 6ES7138-4FA05-0AB0 |
| Festo MPPES31410420 | Pepperl+Fuchs KFD2-DWB-EX1.D | GE M2LR-0G-000-0 |
| Knick P44231AB6M0400k | ABB SINT-4430 REV: J 3AUA0000011915 SINT-4430C | Omron CJ2MCPU1122 |
| Pepperl+Fuchs KFD2-STC4-1.20 | Siemens 6GK1100-2AB00 | Schneider Electric 140CPU67260 |
| ABB 3BHT300051R1 AO650 | GE IC695CPE330-AEAS | Rockwell Automation 22B-D1P4N104 |
| Siemens 6ES7131-4BD01-0AA0 | Omron NX-ID6142-5 | Honeywell TK-PPD011 51309241-175 |
| GE IC756COW15IM-BC | Schneider Electric BMXFTB2820 | Mitsubishi Electric FX3U-16CCL-M |
| Omron C200H-PS211 | Rockwell Automation 1756-M03SE | Lenze EVS9325-EP |
| Schneider Electric TM2DMM8DRT | Honeywell TK-PPD011 | SICK DT35-B15551 |
| Rockwell Automation 1756-OB16D | Mitsubishi Electric FX6Y-I4 | Beckhoff EL1258 |
| Honeywell FC-6RS | Lenze E82ZBC | SEW-EURODRIVE MDX61B0220-503-4-00 |
| Mitsubishi Electric FX3GA-60MT-CM | SICK CLV650-6120 | Phoenix Contact QUINT4-PS/3AC/24DC/10 |
| Lenze E82ZMFBC001 | Beckhoff EL2622 | Moxa EDS-510E-3GTXSFP |
| SICK UM30-214111 | SEW-EURODRIVE MDX61B0055-5A3-4-0T | ifm PN3000; |
| Beckhoff EL7211 | Phoenix Contact QUINT-UPS/ 24DC/ 24DC/20 | Festo DPA-63-10 |






No related record found