Sensor connection
The moisture-resistant female connector mates at the low-frequency accelerometer end.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 9571-20 Standard Interconnect Cable |
| Item NO. | 2911760 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-09-29 |
A shielded field route is provided by Bently Nevada 9571-20, a 20 ft standard interconnect cable for the Low-Frequency Velocity Transducer System. The cable carries the low-frequency accelerometer signal from the transducer connector toward the acceleration interface or monitoring input, completing the wired link between the machine-mounted sensor and the monitor-side circuit.
At the transducer end, 9571-20 uses a moisture-resistant female connector; at the opposite end, individual ring lugs terminate the conductors at the monitor or interface hardware. Its 0.382 mm² shielded conductors control the signal path over the ordered 20 ft length, while the standard unarmored jacket defines a different construction from the 84661 armored cable family.
| Technical Item | 9571-20 |
|---|---|
| Brand | Bently Nevada |
| Product Type | Standard interconnect cable |
| System | Low-Frequency Velocity Transducer System |
| Ordered Length | 20 ft (approximately 6.1 m) |
| Conductor Size | 0.382 mm² (22 AWG) |
| Cable Construction | Shielded standard cable; no stainless-steel armor |
| Transducer End | Moisture-resistant female connector |
| Monitor End | Ring-lug terminations |
| Operating Temperature | -29 to +121°C (-20 to +250°F) |
| Orderable Length Range | 2 to 99 ft (0.60 to 30 m) |
| Signal Role | Carries the accelerometer signal to the interface or monitor |
| Length Code | 20 = 20 ft |
Bently Nevada 9571-20 occupies the middle of the low-frequency measurement chain, so its two ends serve different hardware.
The moisture-resistant female connector mates at the low-frequency accelerometer end.
The 22 AWG shielded conductors carry the sensor signal along the 20 ft run.
Ring lugs separate the conductors for connection at the acceleration interface or monitor side.
The installation details of 9571-20 are governed by its standard jacket, fixed end treatments and published temperature range.
The molded sensor connector and monitor-side ring lugs should remain assigned to their respective ends.
9571-20 does not include the stainless-steel armor used by the 84661 cable family.
The complete run is rated from -29 to +121°C, including the routed section near the machine.
The moisture-resistant female connector is the transducer end. The ring-lug end is reserved for the acceleration interface or monitor terminals.
No. The suffix 20 specifies 20 feet, which is approximately 6.1 metres.
9571-20 is the standard unarmored construction. The 84661 family adds stainless-steel armor, so the mechanical routing requirement must be matched to the ordered cable type.
The published cable range is -29 to +121°C. The full routed path, not only the connector, must remain inside that range.
The monitor end is supplied with ring lugs rather than another transducer connector. Those lugs provide the separate conductor terminations for the receiving hardware.
Moore Automation supplies industrial automation and machinery-monitoring parts for plant maintenance, project enquiries and replacement sourcing. The team records the full requested catalog number so the quoted item retains its ordered length and connection details.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found