Three Armored M10 × 1 Probe Configurations
Compare case length and connector protection before selecting a Bently Nevada 330910 standard-mount metric proximity probe.
Select by Mechanical Reach and Connector Protection
The Bently Nevada 330910 series is the armored M10 × 1 metric standard-mount version of the 3300 NSv proximity probe. The probe operates as part of a matched proximity transducer system with a 3300 NSv extension cable and compatible Proximitor Sensor.
All three configurations use a 1.0 meter total length and standard FEP-insulated 75 Ω coaxial cable. The selection changes at the probe case and connector: one version has a 90 mm case, while two have a 160 mm case; connector option 01 adds the connector protector and option 02 does not.
M10 × 1
Metric case thread
With armor
330910 construction
1.0 meter
Total length option 10
5.26 mm max
Probe tip diameter
The Two Differences That Control Selection
| Specification | 330910-00-09-10-01-00 | 330910-00-16-10-01-00 | 330910-00-16-10-02-00 |
|---|---|---|---|
| Case Length | 90 mm | 160 mm | 160 mm |
| Connector Option | 01 | 01 | 02 |
| Connector Protector | Included | Included | Not included |
| Unthreaded Length | 0 mm | 0 mm | 0 mm |
| Total Length | 1.0 meter (3.25 feet) | 1.0 meter (3.25 feet) | 1.0 meter (3.25 feet) |
| Agency Approval Option | 00 — Not required | 00 — Not required | 00 — Not required |
Shared 3300 NSv Probe Data
Standard-Mount 3300 NSv Probe Geometry
Installation checks buyers ask about
- Confirm 90 mm or 160 mm case reach against the installed mounting.
- Keep M10 × 1 thread engagement within the 15 mm maximum.
- Check whether the installed connector space requires option 01 protector.
- Match the extension cable and Proximitor Sensor to the required system length.
- Verify target material, clearance and probe gap before commissioning.
Current 330910 Ordering Family
Like-for-like replacement
A direct spare should retain the complete part number. Changing 09 to 16 changes case length; changing connector option 01 to 02 removes the connector protector.
Engineering substitution
A different 3300 NSv probe can require changes to mounting reach, cable routing, connector protection, system length or approvals. The probe, extension cable and Proximitor Sensor must remain a matched system.
Recommended Products
| XF830A | NA200T IZMX-RP16A-200 | LFI520 |
| 4100LR12 | SC200-00 | SCD2200-RTU PS-22 |
| IC200MDD844F | IC200MDL650L | ABB 1SDH001000R0505-B0821 |
| BS6151 01 SP01 | ZBRN2 | FGR-002 |
| AMAX-2241 | 8530D-I | THS710 |
| 105S-1 | SC42-EP08 | AMAX-2241/PMA |
| eWONx005CD | CH-LMD1 | SP-0108-H2 |
| ABB 2CDG110137R0011 | IMD-IM20 / IM20DEMO | ABB 3BSE038226R1 |
| SWH-4200 | ABE7 P16T334 | LP/ 557-180-203 |
| D5090S | 004404-005 Q9001L2002 | 6FX5002-5CN01-1BA0 |
| E100 | A01FDLV | 43T69451 |
| SRM-96/ 40-053 | L1485BOXE07 | CON 232 |
| 38B6041X022 | NK105 | AEA4D-05 |
| XLS757-7A-T | PRO32R2 | GE IC200MDL940A |
| PXR11 | GE IC200MDD844F | MTL5541 |
| LFI520 RIF-R | SCD2200-RTU P0924XV | RA92-00644A |
| ZB150-100 | P50099086 | ML350 801233-B21 |
| LNL-MT11-485 | ABB 1VCF339750R1912 | VSRPT-IDOOR-72 |
| 6EP1332-4BA00 | KJ3001X1-CA1 | MT11 |
| 6010P | ABB 1SAM350000R1007 | PW482-10 |
Frequently Asked Questions
What are the main differences among the three 330910 configurations?
The differences are the 90 mm or 160 mm case length and whether the miniature coaxial ClickLoc connector includes a connector protector.
What remains common across all three 330910 part numbers?
All three are armored M10 × 1 metric standard-mount 3300 NSv probes with 0 mm unthreaded length, 1.0 meter total length, standard cable and agency approval option 00.
Can the 90 mm and 160 mm case versions be interchanged directly?
Not without checking mounting depth, thread engagement, probe position, cable routing and installed gap. The case-length code is part of the complete configuration.
Has Bently Nevada discontinued these 330910 configurations?
330910 remains included in the manufacturer’s 2026 ordering information. No discontinuation date or designated successor is listed there.
What should be checked when replacing a 330910 probe?
Match the complete part number, case dimensions, connector protector, total length, approval option, extension cable, Proximitor Sensor, target, mounting clearance and probe gap.
Request the Correct 330910 Configuration
Manager: Leonia
Email: sales@mvme.cn
WhatsApp: +86 180 3017 5807
Send the complete part number, quantity, destination and installed-system details.
Email LeoniaWhatsApp
No related record found