Probe excitation
The Proximitor drives the probe coil through the matched extension cable and receives the target-dependent return.
3301803300 XL 8 mm Proximitor Sensor record
Bently Nevada · Machinery monitoring hardware
Bently Nevada 330180-X1-05 MOD:145004-75 | 3300 XL 8 mm Proximitor Sensor
A configuration-controlled Proximitor Sensor record for conditioning a matched 3300 XL 8 mm probe and extension-cable response.
Input3300 XL 8 mm chain
Output resistance50 ohms
Approval option05 / CSA, ATEX, IECEx
Product facts
Product Overview
Bently Nevada 330180-X1-05 MOD:145004-75 is a configuration-controlled 3300 XL Proximitor Sensor record. The electronics excite the matched 5 mm or 8 mm proximity probe, receive the gap-dependent response through the extension cable and produce the conditioned voltage used by the monitoring input. The final 05 field selects CSA, ATEX and IECEx approvals.
The 3300 XL platform around Bently Nevada 330180-X1-05 MOD:145004-75 operates from a negative 17.5 to 26 Vdc supply at up to 12 mA and presents a 50-ohm output. The standard 8 mm chain provides a 2 mm linear range with a nominal 7.87 V/mm scale factor when probe, extension cable, system length and target calibration agree.
Bently Nevada 330180-X1-05 MOD:145004-75 uses SpringLoc field terminals and a mounting base that electrically isolates the sensor. Three-conductor shielded field wiring carries power, common and conditioned output to the receiving monitor over runs up to 305 m.
Verified data
Technical Specifications
| Technical item | 330180-X1-05 MOD:145004-75 |
|---|---|
| Brand | Bently Nevada |
| Product type | 3300 XL 8 mm Proximitor Sensor |
| Brand country | United States |
| Accepted probe input | 3300-series 5 mm or 3300 XL 8 mm probe chain |
| Supply voltage | -17.5 to -26 Vdc |
| Maximum current | 12 mA |
| Output resistance | 50 ohms |
| Linear range | 2 mm with matched 8 mm system |
| Nominal scale factor | 7.87 V/mm |
| Frequency response | DC to 10 kHz, matched system |
| Field wiring | 16 to 24 AWG, 3-conductor shielded triad |
| Maximum field-wire length | 305 m |
| Terminal style | SpringLoc |
| Mounting-base role | Electrical isolation |
| Operating temperature | -52 to +100 °C |
| Storage temperature | -52 to +105 °C |
| RFI/EMI design | High-immunity 3300 XL platform |
| Agency approval option | 05: CSA, ATEX and IECEx approvals |
Electronic stage
Monitoring & Control: Proximitor Signal Conditioning
Bently Nevada 330180-X1-05 MOD:145004-75 occupies the electronic conversion stage between the matched probe cable and the monitor.
Voltage conversion
Internal electronics convert the returned response into the scale and linear range used by the monitor input.
Low-impedance output
The conditioned signal leaves through a 50-ohm output rather than the raw high-frequency probe response.
Matched components and legacy interfaces
Connectivity & Interoperability: 3300 5/8 mm Chain
Bently Nevada 330180-X1-05 MOD:145004-75 belongs between a compatible 3300 5 mm or 8 mm probe system and the receiving monitor, with total cable length and component family kept consistent.
01
Matched transducer components
Use a probe and extension cable whose combined length matches the Proximitor Sensor system length before the conditioned output is passed to the monitor.
02
XL and non-XL compatibility
3300 XL 5 mm and 8 mm components are electrically and physically interchangeable with corresponding non-XL 3300 components, but a mixed chain is limited to the non-XL system performance.
03
Monitor and mounting interface
The 50-ohm conditioned output connects through shielded field wiring to the monitor, while the isolated base supports DIN-rail or traditional panel mounting without a separate isolator plate.
Practical selection and use
Frequently Asked Questions
What does the final 05 field specify on Bently Nevada 330180-X1-05 MOD:145004-75?
The final 05 field on Bently Nevada 330180-X1-05 MOD:145004-75 selects CSA, ATEX and IECEx approvals for the documented 330180 Proximitor Sensor ordering structure.
Which probe chain can feed Bently Nevada 330180-X1-05 MOD:145004-75?
The 3300 XL Proximitor platform represented by Bently Nevada 330180-X1-05 MOD:145004-75 accepts a matched 3300-series 5 mm or 3300 XL 8 mm probe and extension cable. The total cable length must match the calibrated sensor.
What supply should be prepared for Bently Nevada 330180-X1-05 MOD:145004-75?
Bently Nevada 330180-X1-05 MOD:145004-75 requires a negative 17.5 to 26 Vdc supply and consumes no more than 12 mA. Barrier installations may impose the tighter voltage range used by the approved circuit.
How should field wiring be run from Bently Nevada 330180-X1-05 MOD:145004-75?
Use 16 to 24 AWG three-conductor shielded triad from Bently Nevada 330180-X1-05 MOD:145004-75 to the monitor, up to 305 m. Account for high-frequency roll-off on long runs.
What should be checked when Bently Nevada 330180-X1-05 MOD:145004-75 has the wrong scale factor?
For Bently Nevada 330180-X1-05 MOD:145004-75, confirm probe family, extension-cable length, total system length and target material calibration. A mismatch in any one part changes the expected conversion.
Why is the mounting base important for Bently Nevada 330180-X1-05 MOD:145004-75?
The mounting base of Bently Nevada 330180-X1-05 MOD:145004-75 electrically isolates the electronics from the panel or DIN structure. Preserve that isolation while keeping the field-wire shield terminated as required by the system design.
Moore Automation
About Moore Automation
Moore Automation
https://www.mvme.cn/Moore Automation supplies industrial automation and machinery-monitoring parts through a model-led enquiry process. The requested identifier, quantity, destination and technical references remain together from review through shipment coordination.
A named contact handles commercial follow-up, while photos, drawings and installed-system details can be added to the same enquiry record. This keeps technical and purchasing communication connected to the requested product.
Model-led supplyComplete identifiers retained
Named communicationOne contact for follow-up
Global coordinationInternational delivery support
Mixed brands
Recommended Products
- Rockwell Automation2711PC-T6M20D
- Siemens6ES7648-6CA04-4YX0
- ABBPM880
- Mitsubishi ElectricFX3GA-60MT-CM
- OmronCJ1W-CLK23
- GEIC694CBL200A
- HoneywellFC-200
- Schneider ElectricBMXDDM16025
- Rockwell Automation2711P-K4M20D8
- Siemens6ES7134-6JD00-0CA1
- ABBPM600084
- Mitsubishi ElectricFX0S-20MT-DSS
- OmronCS1W-CTS21
- GE531X121PCRALG1
- HoneywellCC-TDOR01-RP
- Schneider ElectricBMXDDI3202K
- Rockwell Automation1771-IXE
- Siemens6ES7157-0AC00-0XA0
- ABBDI40EX
- Mitsubishi ElectricMR-J3-40A
- OmronCJ2M-CPU12
- GEIS200EDEXG1AFA
- HoneywellFC-TSDI-1624
- Schneider Electric140DDO15310
- Rockwell Automation1771-IAD
- Siemens1FT3035-6AZ99-9-Z
- ABBACS800-01-0006-3+E200
- Mitsubishi ElectricQD75D1
- OmronC200H-PS221
- GEIC200MDL742
- HoneywellCC-100E
- Schneider Electric140ACI04000C
- Rockwell Automation1756-OF8I
- Siemens6ES7214-1BE30-0XB0
- ABBACS255-01U-05A8-1+B068+F278
- Mitsubishi ElectricFX3U-4AD
- OmronCJ1W-TC101
- GEIC693ACC302B
- HoneywellFC-SDi-1624
- Schneider Electric140NOM21100C
- Rockwell Automation1756-OBV8S
- Siemens6ES7307-1EA01-0AA0
- ABBAF041
- Mitsubishi ElectricA2ACPUR21-S1
- OmronC500-LK009-V1
- GEIC3655A137
- HoneywellFC-RUSIO-3244
- Schneider Electric140DDI84100C
- Rockwell Automation1769-SM2/A
- Siemens6ES72741XA300XA0
- ABB1SAP422200R0001
- Mitsubishi ElectricFR-A044-0.4K-EC
- OmronCJ1W-OD234
- GEDS200ACNAG1A
- Honeywell51401583-200
- Schneider ElectricBMXNOC0401
- Rockwell Automation2711PC-T6C20D8
- Siemens6ES7901-3BF21-0XA0
- ABB1SAP260300R0001
- Mitsubishi ElectricFX2N-2DA
Direct enquiry
Contact Information
Moore Automation
Talk with our team
Technical product enquiries and purchasing questions are handled through the channels shown here.
ManagerLeonia
Emailsales@mvme.cnWhatsApp+86 180 3017 5807
No related record found