Probe excitation
The sensor drives the connected probe circuit through the coaxial input.
330180Bently Nevada
Bently Nevada 330180-X1-05 MOD: 145004-132 3300 XL 8 mm Proximitor Sensor, Modified Configuration
DIN-mount positionMultiple approvalsModification 145004-132
01
Product Description
The Bently Nevada 330180-X1-05 MOD: 145004-132 is a modified 3300 XL 8 mm Proximitor sensor that supplies a matched probe, linearizes the eddy-current response and provides the conditioned voltage used by the machinery monitor. The `1` mounting position selects DIN-rail hardware, while approval option `05` identifies the multiple-approval execution.
At the field interface, 330180-X1-05 MOD: 145004-132 accepts one 3300-series 5 mm or 3300 XL 8 mm probe path and separates output, common and −24 Vdc terminals from the coaxial probe connection. Modification 145004-132 remains part of the complete identity; its controlled calibration detail must follow the supplied label and modification record rather than a standard unmodified suffix.
02
Technical Specifications
| Technical Item | 330180-X1-05 MOD: 145004-132 |
|---|---|
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximitor sensor, modified configuration |
| Product Origin | USA |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Mounting Hardware | 1 — DIN mount |
| Agency Approval | 05 — CSA, ATEX and IECEx |
| Modification Identifier | 145004-132 |
| Probe Input | One 3300-series 5 mm or 3300 XL 8 mm probe path |
| Power Requirement | −17.5…−26 Vdc without barriers |
| Barrier Power Requirement | −23…−26 Vdc |
| Maximum Current Consumption | 12 mA |
| Output Resistance | 50 Ω |
| Standard Linear Range | 2.0 mm (80 mil) |
| Standard Scale Factor | 7.87 V/mm (200 mV/mil) |
| Recommended Gap Voltage | Approximately −9 Vdc |
| Recommended Field Wiring | 3-conductor shielded triad |
| Field-wire Size | 0.2…1.5 mm² (16…24 AWG) |
| Maximum Field-wire Length | 305 m (1,000 ft) to monitor |
| Terminal Type | Spring-clamp terminals |
| Calibration Reference | Final modified calibration follows the 145004-132 label and controlled record |
03
Product Functions — Proximitor Signal Conditioning
330180-X1-05 MOD: 145004-132 performs the powered electronics functions between the passive probe coil and the monitor input.
Response linearization
Electronics convert coil-impedance changes into a linear gap and vibration voltage.
Low-impedance output
A 50 Ω output drives the shielded field wire toward the monitoring channel.
04
Configuration Control — Modified DIN-mount Execution
The complete identity combines the DIN-mount position, multiple approvals and a controlled modification number that remains visible through quotation and installation.
DIN-rail hardware
Mounting position 1 places the electronics on the documented DIN-rail assembly.
Approval option 05
The suffix selects CSA, ATEX and IECEx approvals for the complete execution.
Modification traceability
The 145004-132 identifier is checked on the supplied label before its calibration details are entered into the channel record.
05
Frequently Asked Questions
Why must the full 330180-X1-05 MOD: 145004-132 identity stay on the quotation?
The modification is part of the delivered calibration identity and cannot be replaced by the base 330180 code alone.
What powers 330180-X1-05 MOD: 145004-132?
Connect the documented negative dc supply and common at the spring-clamp terminals; barrier installations use the narrower supply range.
Why can 330180-X1-05 MOD: 145004-132 show the wrong gap after replacement?
Check probe/system length, target calibration, terminal polarity and the modification label before changing monitor settings.
Where is 330180-X1-05 MOD: 145004-132 mounted?
The `1` hardware position identifies the DIN-mount execution.
What wire is used from 330180-X1-05 MOD: 145004-132 to the monitor?
Use a three-conductor shielded triad within the documented size and length limits.
Does approval 05 define the calibration of 330180-X1-05 MOD: 145004-132?
No. It selects CSA, ATEX and IECEx approvals; the modification record defines the special calibration detail.
06
Catalog Verification
Moore Automation keeps the complete base number, approval suffix and modification identifier linked to the enquiry and label review.
Catalog verificationThe full model and suffix stay visible.
Original productsIndustrial components are supplied with traceable identification.
One-year warrantyCoverage remains linked to the order record.
Global deliveryExport packing and tracking are coordinated.
07
Recommended Products
| GEIC698PSA350 | ICS TriplexT8311CX | MotorolaMVME2604-1131B |
| Siemens6ES7232-4HB32-0XB0 | Triconex3564 | Vibro-MeterRPS6U |
| WoodwardRB5 | ABB902F | Vibro-Meter200-582-200-013 |
| Woodward8251-046 | ABBACS510-01-072A-4 | Allen-Bradley2711P-T9W21D8S |
| Bently Nevada991-25-70-01-00 | GEIC693ALG442 | Siemens6ES7521-1BH10-0AA0 |
| Vibro-Meter200-582-300-013 | Woodward8551-0146 | ABBACS510-01-088A-4 |
| Allen-Bradley2715P-T7CD | Bently Nevada991-25-70-01-01 | GEIC693CMM311 |
| Siemens6ES7521-1BL00-0AB0 | Vibro-Meter200-582-500-013 | Woodward1766-605 |
| ABBACS355 | Allen-Bradley2715P-T12WD | Bently Nevada330106-05-30-10-02-IN |
| GEIC693CMM321 | Siemens6ES7521-1FH00-0AA0 | Vibro-Meter200-582-916-034 |
| ABBACS355-03E-04A1-4 | Allen-Bradley2713P-T10CD1 | Bently Nevada330103-00-25-05-02-00 |
| GEIC693BEM331 | Siemens6ES7521-7EH00-0AB0 | Vibro-Meter200-582-993-022 |
| ABBACS355-03E-05A6-4 | Allen-Bradley2711P-T7C4D8 | Bently Nevada60M100 |
| GEIC693APU300 | Siemens6ES7522-1BH10-0AA0 | Vibro-MeterTQ412 |
| ABBACS355-03E-07A3-4 | Allen-Bradley2711P-T10C4D8 | Bently Nevada60M500 |
| GEIC693PCM301 | Siemens6ES7522-1BL01-0AB0 | Vibro-MeterEA402 |
| ABBACS355-03E-08A8-4 | Allen-Bradley2711P-T12C4D8 | Bently Nevada60M500-05-00 |
| GEIC697CPX772 | Siemens6ES7522-1FH00-0AA0 | Vibro-MeterEA902 |
| ABBACS355-03E-12A5-4 | Allen-Bradley2711P-T15C4D8 | Bently Nevada60R/BLK01 |
| GEIC697CPX782 | Siemens6ES7522-5EH00-0AB0 | Vibro-MeterIQS452 |
No related record found