Metric mounting body
The M10 × 1 case on 330104-02-09-10-01-00 enters a matching metric threaded mounting point. Its wrench flats provide the mechanical surface for positioning the probe without loading the attached cable.
BENTLY NEVADA 330104-02-09-10-01-00 3300 XL 8 MM PROXIMITY PROBE
Product Description
Within the three-part 3300 XL 8 mm Proximity Transducer System, the Bently Nevada 330104-02-09-10-01-00 serves as the metric, standard-mount sensing probe. Its 8 mm tip responds to the distance from a conductive target, while the attached cable carries that response to the matching Proximitor Sensor so the complete system can measure static position and dynamic vibration.
Mechanically, Bently Nevada 330104-02-09-10-01-00 combines an M10 × 1 threaded stainless-steel case with an armored lead, a one-metre total cable length, and a protected miniature ClickLoc connection. The 20 mm unthreaded section and 90 mm case length define how the probe enters the mounting location; approval code 00 identifies this exact ordering configuration as the version without an agency-approval option.
Technical Specifications
| Technical Item | 330104-02-09-10-01-00 |
|---|---|
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm proximity probe |
| Brand Country | United States |
| Product System | 3300 XL 8 mm Proximity Transducer System |
| Mounting Configuration | Metric standard mount, with armor |
| Case Thread | M10 × 1 |
| Unthreaded Length | 20 mm |
| Overall Case Length | 90 mm |
| Total Probe Length | 1.0 m (3.3 ft) |
| Connector and Cable | Miniature coaxial ClickLoc connector with connector protector; standard cable |
| Agency Approval Option | Not required |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Cable | 75 Ω triaxial FEP-insulated cable |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
Metric Armored Probe Construction
Armored lead transition
Flexible stainless-steel armor with an FEP outer jacket surrounds the lead leaving 330104-02-09-10-01-00. The armor protects that lead mechanically while the 75 Ω triaxial cable preserves the electrical path to the connector.
Protected ClickLoc coupling
The miniature coaxial ClickLoc connector on 330104-02-09-10-01-00 mates finger-tight with the next system component. The supplied connector protector encloses the coupling after connection and adds environmental protection around the joint.
One-Metre Measurement Chain
Gap becomes an electrical response
The tip of 330104-02-09-10-01-00 faces the conductive surface without physical contact. Movement of that surface changes the probe response sent along the attached lead.
No extension cable in the one-metre chain
Because 330104-02-09-10-01-00 uses the one-metre length option, the probe connects to a one-metre 3300 XL Proximitor Sensor without an extension cable. Adding an extension cable would change the required system length.
Proximitor output follows the gap
The connected Proximitor Sensor converts the response from 330104-02-09-10-01-00 into an output voltage proportional to probe-tip distance. That output supports both static position and dynamic vibration measurements.
Frequently Asked Questions
Why might Bently Nevada 330104-02-09-10-01-00 not enter an existing probe mounting hole?
Bently Nevada 330104-02-09-10-01-00 uses an M10 × 1 metric case thread, so it should not be forced into a 3/8-24 UNF mounting hole. Confirm the internal thread and available engagement before installation; excessive or mismatched engagement can bind the probe body.
Does Bently Nevada 330104-02-09-10-01-00 require a 3300 XL extension cable?
Bently Nevada 330104-02-09-10-01-00 is ordered with a one-metre total length, and a one-metre 3300 XL system does not use an extension cable. Connect it to the corresponding one-metre Proximitor Sensor rather than adding cable that changes the calibrated system length.
What should be checked when the signal changes after reconnecting Bently Nevada 330104-02-09-10-01-00?
For Bently Nevada 330104-02-09-10-01-00, first verify that the gold ClickLoc connection has reached its finger-tight click and that the connector protector is seated around the joint. Then inspect the armored lead, connector transition, target gap, and cable bend for mechanical disturbance before changing monitor settings.
Can Bently Nevada 330104-02-09-10-01-00 be treated as the same configuration as a 330103 probe?
Bently Nevada 330104-02-09-10-01-00 and 330103 share the M10 × 1 metric probe family, but 330104-02-09-10-01-00 includes armor while 330103 is the unarmored construction. Confirm the full ordering code, case dimensions, cable option, connection protection, and required approvals instead of substituting by the six-digit base number alone.
Is Bently Nevada 330104-02-09-10-01-00 the correct choice when hazardous-area approvals are required?
Bently Nevada 330104-02-09-10-01-00 ends in approval code 00, which means an agency-approval option was not requested for this ordering configuration. If the installation requires CSA, ATEX, or IECEx coverage, select and verify the officially approved suffix instead of assuming code 00 carries the same approvals.
How can cross-talk be limited when Bently Nevada 330104-02-09-10-01-00 is installed near another probe?
When using Bently Nevada 330104-02-09-10-01-00 beside another 3300 XL 8 mm system, preserve adequate target size and probe-tip separation. General guidance is at least 40 mm between tips for axial-position measurement or 38 mm for radial-vibration measurement, with the final arrangement checked against shaft diameter and mounting geometry.
Service Support
MOORE AUTOMATION
https://www.mvme.cn/Moore Automation assigns a sales contact to keep the complete model, quantity, destination, quotation details, and order updates connected to the same enquiry. Clear identification remains attached to the request from initial review through packing and shipment handoff.
Dedicated contactOne manager follows the enquiry.
Order detailsModel and quantity stay visible.
Shipment updatesTracking follows dispatch.
www.mvme.cn
Recommended Products
ABBACS150-01E-02A4-2
Siemens3RG6112-3CF01-PF
GEIS215VPROH2BC
OmronCPM-CABLE-PWR-MS120
Mitsubishi ElectricFX9105RI
HoneywellTK-IAH061
Schneider ElectricA9MEM2135
Rockwell Automation1756-OF4
ABBACS310-03E-02A6-2
Siemens1FK6060-6AF71-1GG0
GEIC695CPE330-AEAS
OmronC200H-IA122
Mitsubishi ElectricFR-E520-0.1K
HoneywellCC-PA0N01
Schneider ElectricTSXAMZ600
Rockwell Automation1771-RTP4
ABBACS310-03E-17A2-4
Siemens6SE6440-2UD27-5CA1
GEIC698PSD300C
OmronCPM253-PS8505
Mitsubishi ElectricMR-J20A
HoneywellCC-TUI041
Schneider ElectricBMXNRP0200C
Rockwell Automation1771-IFE
ABBACS310-03U-34A1-4
Siemens6GK5615-0AA00-2AA2
GEIC600CB536L
OmronC200HW-SLK24
Mitsubishi ElectricFX0S-30MR-DS
HoneywellCC-PAIX01
Schneider ElectricTM3XREC1
Rockwell Automation1771-WA
ABBACS320-01U-04A7-2
Siemens6SL3420-1TE21-0AA1
GEIC693PWR321W
OmronC500-MD211CN
Mitsubishi ElectricFX2N-8AD
Honeywell51410069-176
Schneider ElectricTSXRKY4EX
Rockwell Automation1746-BAS
ABBACS320-03E-05A2-2
Siemens6SL3000-0DE21-6AA0
GEIC200UDR005-CH
OmronCS1W-OC211
Mitsubishi ElectricFX1N-60MR-ES/UL
Honeywell51405040-176
Schneider Electric140DA084210
Rockwell Automation1769-IQ6XOW4
ABBACS320-03E-19A4-2
Siemens6FX2001-5FP24
GEIC693ALG222C
OmronCJ2M-CPU34
Mitsubishi ElectricFR-D720-0.4
HoneywellFC-051
Schneider ElectricTSXDSY16R5
Rockwell Automation1771-WH
ABBACS320-03U-10A8-2
Siemens6GK5992-2SA00-8AA0
GEIC200ALG430F
OmronC200H-ID217
Contact Us
Send the complete model, quantity, and destination for a precise quotation.
No related record found