330102-00-20-05-02-00Armored Standard-Mount Probe
A 3/8-24 UNF eddy-current proximity probe for static position and dynamic vibration measurements on rotating machinery.
Purpose-Built for Machinery Measurements
The Bently Nevada 330102-00-20-05-02-00 is a standard-mount probe in the 3300 XL 8 mm Proximity Transducer System. Its 3/8-24 UNF threaded body supports inch-thread installations, while flexible AISI 302 or 304 stainless-steel armor with an FEP outer jacket protects the probe lead.
A complete 3300 XL 8 mm system includes one probe, one extension cable and one Proximitor Sensor. The system output is directly proportional to the distance between the probe tip and the observed conductive surface, allowing measurement of both static position and dynamic vibration.
Read the Complete Configuration
3300 XL 8 mm Standard-Mount Probe
330102-00-20-05-02-00 Specifications
- Manufacturer
- Bently Nevada, a Baker Hughes business
- Product Family
- 3300 XL 8 mm Proximity Transducer System
- Product Type
- Armored standard-mount proximity probe
- Full Part Number
- 330102-00-20-05-02-00
- Probe Tip Diameter
- 8.0 mm (0.31 in)
- Case Thread
- 3/8-24 UNF-2A
- Unthreaded Length
- 0.0 in
- Overall Case Length
- 2.0 in
- Total Length
- 0.5 m (1.6 ft)
- Connector
- Miniature coaxial ClickLoc connector
- Probe Cable
- 75 Ω triaxial, FEP insulated
- Armor
- Flexible AISI 302 or 304 SST with FEP outer jacket
- Probe Tip Material
- Polyphenylene sulfide (PPS)
- Probe Case Material
- AISI 303 or 304 stainless steel
- Tensile Strength
- 330 N (75 lbf), probe case to probe lead
- Agency Approval Option
- Not required
- System Linear Range
- 2 mm (80 mils), from 0.25 to 2.3 mm
- Nominal Sensitivity
- 7.87 V/mm (200 mV/mil)
- Frequency Response
- 0 to 10 kHz, +0/-3 dB
- Recommended Radial Gap
- -9 Vdc, approximately 1.27 mm (50 mils)
Complete the Electrical Chain
Measurements Supported by the 3300 XL System
Dynamic shaft vibration measurement on fluid-film bearing machines.
Static shaft or rotor position measurement against a suitable conductive target.
Phase-reference measurement for machinery diagnostics and analysis.
Rotational speed measurement with the appropriate target and monitor arrangement.
Ordering Status and Substitution Checks
Current ordering information
330102 remains included in the current 3300 XL 8 mm probe ordering table. No discontinuation date, last-time-buy date, support end date or designated one-for-one successor is stated for 330102-00-20-05-02-00.
Like-for-like replacement
Use the complete part number 330102-00-20-05-02-00 and retain the compatible extension cable, Proximitor Sensor, electrical system length, mounting arrangement and installed gap.
Related configurations
- 330101: 3/8-24 UNF standard mount, without armor
- 330103: M10 × 1 standard mount, without armor
- 330104: M10 × 1 standard mount, with armor
- 330105 / 330106: reverse-mount configurations
Changing the base number or any suffix requires a mechanical, electrical and installation review; these related configurations are not automatic direct replacements.
Recommended Products
| ABB PM554 DO561 | GE IC200CHS022L | Allen Bradley 1756-IA16I |
| ABB A44 353-100 | GE MIS-PE 752-138 | Honeywell 2MLR-AC23-CC |
| ABB DA502-XC 1SAP450800R0001 | GE M2000 M2PBMPP | ABB DO524 A5 1SAP240700R0001 |
| ABB PM571 / 1SAP130100R0270 | GE CR104PLG92G | ABB DI724F 3BDH000374R0001 |
| ABB 2CDG 120 044 R0011 | GE CR104PLG92M | ABB TU810V1 3BSE013230R1 |
| ABB 1SFL431001R8111 A95-30-11 | GE CL45D300M | ABB 2CDG110071R0011 |
| ABB 3BSE020512R1 AI801 | GE RE2M 101873 | ABB 1MRK000066-AA |
| ABB DO820 3BSE008514R1 | GE IC655BEM500B | ABB 1SAP450000R0001 AO523 |
| ABB CI501 / 1SAP220600R0001 | GE VT7830 | ABB 1SDA054869R1 |
| ABB 1SDA000624R1 | GE 517-0147-04C 04-21-956029 | ABB 2CDG110079R0011 |
| ABB 6131/30-24-500 2CKA006132A0346 | GE IC200ALG431F GE IC200CHS002D | ABB 1SAP450600R0001 AI531 |
| ABB 1SNK506310R0000 | ABB PM554-TA1 1TNE968900R0100 | ABB CM589-PNIO 1SAP172900R0011 |
| ABB 1SVP426372R1000 | ABB PM571-ETH 1SAP130100R0170 | ABB 3BSE020838R1 - DO840 |
| ABB TG/S3.1 | ABB BA-M-0.4.1 | ABB 1KNU3000R1001 23BI61R1LF |
| ABB Bio0007 2RCA026772A0001D / 2RCA026773D | ABB 2RCA023019A0003K 2RCA023009M COM0033 | ABB PNU32 |
| ABB 3BSE020512R1 | ABB 1SD A0 66317 | ABB 1SBL281001R8432 |
| ABB 6197/13-101-500 | ABB 2CDG 110 093 R0011 | ABB RCQ 020/A |
| ABB DA 701F 3BDH000371R0005 | ABB PNU32.0 / 1SAJ263000R0100 | ABB 3BSE023675R1 3BSE021445R1 |
| ABB 3BSE005851R0001 SDCS-IOE-1 3ADT220090R0025 | ABB 61085301F | ABB 500MDD01 1KGT034200R001 |
| ABB AI810 3BSE008516R1 TU810V1 3BSE013230R1 | ABB A44 | ABB 020/A |
Frequently Asked Questions
What configuration does 330102-00-20-05-02-00 identify?
The ordering number identifies a 3300 XL 8 mm standard-mount probe with a 3/8-24 UNF thread and armor, 0.0-inch unthreaded length, 2.0-inch case length, 0.5 m total length, standard cable, miniature ClickLoc coaxial connector and no agency approval option.
Which components complete the 330102-00-20-05-02-00 measurement system?
The probe operates with a 3300 XL extension cable and a 3300 XL Proximitor Sensor. Select the extension cable and sensor so the complete electrical system is configured for the required 5 m or 9 m length.
Where is 330102-00-20-05-02-00 commonly applied?
Within a complete 3300 XL 8 mm system, the probe supports radial vibration, axial position, Keyphasor reference and speed measurements, principally on fluid-film bearing machines.
Has Bently Nevada discontinued 330102-00-20-05-02-00?
330102 remains listed in current 3300 XL 8 mm probe ordering information. No discontinuation date, last-time-buy date, support end date or designated direct successor is stated for this configuration.
Can another 3300 XL 8 mm probe directly replace 330102-00-20-05-02-00?
A different probe is not automatically a direct replacement. Verify the base probe type, thread, armor, unthreaded length, case length, total length, connector, cable type, approval option, extension cable, Proximitor Sensor, electrical system length and installed gap before substitution.
Send Your 330102 Inquiry
Manager: Leonia
Email: sales@mvme.cn
WhatsApp: +86 180 3017 5807
Include the complete part number, quantity, destination country and installed system details.
No related record found