8 mm Probe
330101-00-60-90-01-05
Configured 3300 XL 8 mm proximity probe with a standard mount, 9 m cable and ClickLoc connector protection.
01Product Description
330101-00-60-90-01-05 is a Bently Nevada 3300 XL 8 mm proximity probe with a 3/8-24 UNF standard mount, no cable armor, a 0.0 in unthreaded length and a 6.0 in case length. It forms the sensing end of a 3300 XL 8 mm proximity transducer system.
In the complete measurement chain, the probe, extension cable and Proximitor Sensor work together to produce an output voltage proportional to the distance between the probe tip and a conductive target. The system is used for static position, dynamic vibration, Keyphasor signal and speed measurement.
330101-00-60-90-01-05 combines a 9 m 75 Ohm FEP-insulated triaxial cable with a miniature coaxial ClickLoc connector and protector. The 05 option applies CSA, ATEX and IECEx approvals to this configuration.
02Technical Specifications
| Technical item | 330101-00-60-90-01-05 |
|---|---|
| Brand | Bently Nevada |
| Product type | 3300 XL 8 mm proximity probe |
| Country / region | United States |
| Probe tip diameter | 8.0 mm (0.31 in) |
| Mounting thread | 3/8-24 UNF |
| Cable construction | 75 Ohm triaxial cable with FEP insulation |
| Cable armor | None |
| Total cable length | 9.0 m (29.5 ft) |
| Connector | Miniature coaxial ClickLoc connector with protector |
| Approvals | CSA, ATEX and IECEx |
03Product Features
Mechanical and connection configuration
The 8.0 mm probe tip is mounted in a forward-mount case with a 3/8-24 UNF thread and 5/16 in wrench flats. The selected configuration has no cable armor, a 0.0 in unthreaded section and a 6.0 in case length.
The integral 9 m cable is 75 Ohm triaxial construction with FEP insulation. Its miniature coaxial ClickLoc connector includes a protector, providing the specified compact connection arrangement at the cable end.
The final 05 configuration option combines CSA, ATEX and IECEx approvals. Together, the mechanical suffixes, cable length, connector arrangement and approval option identify the complete probe configuration.
04Installation Steps
- Confirm that the complete order code matches the required probe length, case length, cable length and approval option before fitting the probe.
- Mount the 3/8-24 UNF threaded case in the standard forward-mount location. Use the 5/16 in wrench flats and keep the unthreaded portion at least 0.8 in shorter than the case length.
- Route the 9 m cable without sharp turns. Maintain a minimum bend radius of 25.4 mm (1.0 in) for the 3300 XL cable.
- Mate the miniature coaxial ClickLoc connector only after the cable route is supported and the connector protector can remain in place.
05Product FAQ
How do I confirm that 330101-00-60-90-01-05 is the correct replacement?
Match the entire order code, not just the 330101 base. This configuration has a 0.0 in unthreaded length, 6.0 in case length, 9 m cable, ClickLoc connector protection and the 05 approval option.
Where should the 9 m cable for 330101-00-60-90-01-05 be routed?
Plan the route so the cable reaches the connection point without tight bends. Keep the cable bend radius at or above 25.4 mm (1.0 in) and support the cable before the connector.
Can 330101-00-60-90-01-05 be fitted into any 3300 XL mounting point?
It is a standard forward-mount probe with a 3/8-24 UNF threaded case. Confirm the threaded mounting location and the required 6.0 in case length before installation.
What does the connector protector do on 330101-00-60-90-01-05?
The selected miniature coaxial ClickLoc connector is supplied with a protector. Keep it in place while routing and connecting the cable so the compact connection is not exposed to unnecessary handling.
How should I assess area approval needs for 330101-00-60-90-01-05?
The 05 option is specified for CSA, ATEX and IECEx. Confirm that the site classification and the complete installed system requirements match the required approval arrangement.
What should be checked before replacing 330101-00-60-90-01-05 during a shutdown?
Record the existing probe’s full part number, mounting thread, unthreaded length, case length, cable route and connector arrangement before removing it. This avoids substituting a probe with a different mechanical configuration.
06Service Benefits from Moore Automation
Order support that stays focused
Moore Automation supports industrial automation parts for maintenance and replacement planning. A complete model number and quantity help identify the requested item for an enquiry.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
No related record found