Bently Nevada24701 Proximity Probe Housing

Bently Nevada 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 | 24701 Stainless-Steel Proximity Probe Housing Assemblies

Name: Bently Nevada 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 | 24701 Stainless-Steel Proximity Probe Housing Assemblies
Brand: Bently Nevada
SKU: 2929810
Price: 1 USD
Availability: InStock

Record01

Model Information

Corrosion-resistant external probe access is the purpose of Bently Nevada 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02. Both records identify stainless-steel proximity probe housing assemblies with a multiple-approval 3300 XL 8 mm probe and 0.5 m probe cable.

The ordered sleeve geometry separates the two 24701 records. One configuration reaches 4.0 in through the machine boundary and the other reaches 2.4 in, so the probe tip, shaft target and available machine-case clearance must be checked against the exact record rather than the shared housing family.

Fitting option 03 and the 3/4-14 NPT mounting selection organize the external conduit transition for 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02. The stainless housing protects the adjustable probe assembly; it does not replace the electrical matching requirement between probe, extension cable and Proximitor Sensor.

Bently Nevada 24701 stainless steel probe housing assembly drawing

Data02

Technical Specifications

Technical item	40 penetration	24 penetration
Brand	Bently Nevada
Model	24701-28-05-20-040-03-02	24701-28-05-20-024-03-02
Product Name	24701 stainless-steel proximity probe housing assembly
Country	United States
Housing Material	Stainless steel
Included Probe	3300 XL 8 mm probe, multiple approvals
Probe Cable Length	0.5 m
Standoff Option	2.0 in
Probe Penetration	4.0 in	2.4 in
Fitting Set	Option 03
Mounting Thread	3/4-14 NPT
Primary Function	External access for probe adjustment and replacement
Environmental Role	Mechanical enclosure and cable-entry protection
Probe Sleeve Control	Support long combined standoff and penetration dimensions
Signal-System Boundary	Housing selection does not change the required matched transducer system

Focus03

Performance Characteristics

Stainless enclosure

The two 24701 records share material and probe family but create different sensing reach inside the machine case. The guidance below explains how the complete 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 record is applied in the installed assembly rather than repeating isolated catalogue values.

Stainless enclosure

The stainless housing is selected where the external assembly needs corrosion-resistant mechanical protection. Validate this behavior against the installed target and operating range used with 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02.

Reach selection

A 4.0 in penetration and a 2.4 in penetration position the same probe family at different machine depths. Confirm the response after all mounting and monitor settings for 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 are fixed.

Adjustment access

The cover and internal retaining hardware allow the gap to be set at the housing rather than from inside the casing. Judge the result from the complete 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 measurement path rather than one isolated value.

Focus04

Installation Highlights

Verify available depth

Installation succeeds when sleeve geometry, seal points and conduit entry are treated as one assembled path. The guidance below explains how the complete 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 record is applied in the installed assembly rather than repeating isolated catalogue values.

Path 01

Verify available depth

Measure the machine-case wall and target position before choosing between the two penetration records. Before closure, record the final position and hardware state for 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02.

Identify the exact 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 interface before work begins.

Trace the connected mechanical or electrical path.

Record the verified condition before commissioning.

Path 02

Support the sleeve

Provide additional mechanical support when the combined reach exceeds the limit stated for the housing family. After the mechanical work, verify cable freedom and the measurement gap for 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02.

Keep the 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 channel and component references together.

Confirm the next device or machine boundary in the path.

Test the completed connection under its intended condition.

Path 03

Close and inspect

After gapping, confirm O-ring seating, cable freedom and conduit sealing before returning the machine to service. Finish with an inspection record that ties the mounted assembly back to 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02.

Preserve the complete 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 identifier in the work record.

Separate mounting, wiring and signal checks during diagnosis.

Hand over the final result with the installed configuration.

Help05

Common Product Questions

When is the shorter penetration in 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 the safer choice?

Choose the 2.4 in record within 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 only when the measured case wall and target position support that reach. The 4.0 in version should not be shortened by changing the sleeve setting outside its ordered geometry.

What corrosion-related check applies to 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02?

Although 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 uses a stainless-steel housing, inspect O-rings, conduit sealing and any dissimilar-metal interface. Stainless construction does not remove the need to keep moisture out of the probe connector area.

Can the two records in 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 share one installation drawing?

They can share a family drawing only if the selected 4.0 in or 2.4 in penetration is marked clearly. 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 must remain visible on the work package so the sleeve depth is not inferred from the picture.

How is the probe gap preserved after servicing 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02?

For 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02, secure the sleeve and retaining hardware, close the cover without twisting the lead, then recheck dc gap at the Proximitor Sensor. The final voltage check catches movement introduced during closure.

What does fitting option 03 control on 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02?

On 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02, option 03 organizes the outgoing conduit transition and sealing hardware. Verify the complete fitting set before routing the cable so the enclosure is not left with an improvised entry.

What evidence helps confirm 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 before dispatch?

Provide 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02, required quantity, penetration depth and photographs of the machine opening. This distinguishes the two stainless builds before packing without claiming that another 24701 variant is interchangeable.

Moore06

Service Support

Moore Automation

https://www.mvme.cn

Service support covers model review, available document coordination and a direct response path for industrial automation enquiries. The scope stays focused on the requested article and does not imply manufacturer authorization or guaranteed stock.

Model reviewThe exact reference is checked before follow-up.

File routeAvailable records remain linked to the enquiry.

Question handlingTechnical and commercial questions stay distinguishable.

Response pathOne contact keeps communication concise.

Catalogue07

More Products

ALLEN-BRADLEY1756-L85ES

HONEYWELLFC-SAI-1620M

Bently Nevada3500/32M 149986-02

ABBPM564-TP

TRICONEX4355X

MotorolaMVME5100-0163

HIMAF2 DO 16 02

HIMAF3 AIO 8/4 01

HIMAF3 DIO 8/8 01

HIMAF3 DIO 20/8 02

HIMAF3 DIO 24/16 01

HIMAF3 DI 16 01

HIMAF3 DO 8 01

HoneywellTC-CCR014

MotorolaMVME55006E-0161R

Siemens6ES7290-6AA30-0XA0

TRICONEX3211

ABBPM5680-2ETH

Allen-Bradley1756-L63

Bently Nevada3500/53 133396-01

EmersonKJ3002X1-BD1

HIMAF8641

HoneywellCC-GAIX11

MotorolaMVME61006E-0171

Siemens6ES7515-2FM02-0AB0

Allen-Bradley1756-IA16

HIMAF6250

ABBDI524

EmersonVE4005S2B2

Allen-Bradley1756-IR6I

Siemens6ES7511-1TK01-0AB0

Siemens6ES7515-2RN03-0AB0

Siemens6ES7518-4JP00-0AB0

Siemens6ES7521-1BL00-0AB0

Siemens6ES7521-7EH00-0AB0

Siemens6ES7522-1BL01-0AB0

Siemens6ES7522-5EH00-0AB0

Siemens6ES7531-7KF00-0AB0

Siemens6ES7531-7PF00-0AB0

Siemens6ES7532-5HD00-0AB0

ABBCI521-MODTCP

Siemens6ES7542-1AX00-0AB0

ABBCM577-ETH

Bently Nevada330173-00-06-10-02-00

Siemens6ES7507-0RA00-0AB0

ABBTB541-ETH

Bently Nevada990-05-70-03-05

Siemens6ED1052-1FB08-0BA1

ABB07KT92

Bently Nevada60M100

Siemens6ED1055-1MD00-0BA2

ABBCI868K01

Bently Nevada60R/PPM01-02-0

Bently Nevada60X/CMP01-AA

Bently Nevada3701/40 177988-01

Bently Nevada330850-51-00

Bently Nevada330380-90-00

Bently Nevada330880-16-00-021-03-02

Bently NevadaSCOUT240-IS

Bently Nevada330103-00-06-10-02-00

Contact08

Sales Enquiries

Moore AutomationSend the complete model and requested quantity.

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	Bently Nevada 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 \| 24701 Stainless-Steel Proximity Probe Housing Assemblies
Item NO.	2929810
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-04

Bently Nevada 24701-28-05-20-040-03-02 / 24701-28-05-20-024-03-02 | 24701 Stainless-Steel Proximity Probe Housing Assemblies Item NO.: 2929810