Bently Nevada21000 Proximity Probe Housing

Bently Nevada 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 | 21000 Aluminum Proximity Probe Housing Assemblies

Name: Bently Nevada 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 | 21000 Aluminum Proximity Probe Housing Assemblies
Brand: Bently Nevada
SKU: 2929788
Price: 1 USD
Availability: InStock

Record01

Product Introduction

Bently Nevada 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 combines two aluminum proximity-probe housing configurations for external probe access on a machine case. The housing surrounds the reverse-mount probe, extension connection and adjustable sleeve so probe position can be reached without opening the machine casing.

In 21000-28-05-15-039-03-02, option 28 supplies a multiple-approval 3300 XL 8 mm probe with a 0.5 m cable, while the 1.5 in standoff and 3.9 in penetration define the installed reach. Fitting option 03 organizes the cable exit through plugs, reducer and seal-grip parts.

The second record, 21000-16-10-06-065-04-02, retains a standard 3300 XL 8 mm probe with a 1.0 m cable and a different standoff/penetration stack. Both complete records use the 3/4-14 NPT mounting selection, but their probe approval, cable length and installed geometry must remain separate.

Bently Nevada 21000 proximity probe housing assembly drawing

Data02

Technical Information

Technical item	Configuration 1	Configuration 2
Brand	Bently Nevada
Model	21000-28-05-15-039-03-02	21000-16-10-06-065-04-02
Product Name	21000 aluminum proximity probe housing assembly
Country	United States
Housing Material	Cast aluminum
Included Probe	3300 XL 8 mm, multiple approvals	3300 XL 8 mm, standard approval selection
Probe Cable Length	0.5 m	1.0 m
Standoff Length	1.5 in	0.6 in
Probe Penetration	3.9 in	6.5 in
Fitting Set	Option 03	Option 04
Mounting Thread	3/4-14 NPT
Access Function	External probe gap adjustment and replacement
Housing Components	Dome cover, sleeve, O-rings, probe mount and conduit entry
Hazardous-Area Boundary	Use only with the approval configuration stated by the complete order code
Installation Control	Preserve standoff plus penetration dimensions and support long sleeves

Focus03

Installation Highlights

Prepare the mounting axis

Keep the machine-case thread, sleeve reach and cable exit under separate control before the cover is closed. The guidance below explains how the complete 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 record is applied in the installed assembly rather than repeating isolated catalogue values.

Prepare the mounting axis

Clean the 3/4-14 NPT opening and confirm that the housing axis points at the intended shaft target. Before closure, record the final position and hardware state for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02.

Set the ordered reach

Build the standoff and probe-penetration dimensions from the complete order code; do not copy dimensions from the other configuration. After the mechanical work, verify cable freedom and the measurement gap for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02.

Seal the outgoing route

Fit the ordered plugs, reducer and cable grip, then verify that the probe cable is not twisted inside the cover. Finish with an inspection record that ties the mounted assembly back to 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02.

Focus04

System Integration

Probe end

The housing is mechanical access hardware around a matched proximity-transducer signal path. The guidance below explains how the complete 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 record is applied in the installed assembly rather than repeating isolated catalogue values.

Path 01

Probe end

The reverse-mount probe establishes the non-contact sensing gap at the conductive target. Document the upstream and downstream interfaces so 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 remains identifiable in the complete path.

Identify the exact 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 interface before work begins.

Trace the connected mechanical or electrical path.

Record the verified condition before commissioning.

Path 02

Connection boundary

The housing protects the probe connector and provides the transition to the extension-cable route. Check the physical connection first, then confirm that the signal reaches the intended channel for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02.

Keep the 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 channel and component references together.

Confirm the next device or machine boundary in the path.

Test the completed connection under its intended condition.

Path 03

Monitor path

The probe and extension cable remain matched to the appropriate Proximitor Sensor before the conditioned signal reaches the monitor. Retain the connected-component references with 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 for commissioning and later fault tracing.

Preserve the complete 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 identifier in the work record.

Separate mounting, wiring and signal checks during diagnosis.

Hand over the final result with the installed configuration.

Help05

Frequently Asked Questions

Which reach should be retained when reordering 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02?

For 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02, keep each standoff and penetration pair with its own complete code. The 1.5 in/3.9 in build and the 0.6 in/6.5 in build must not be reconstructed from the shared 21000 family name.

How can a buyer avoid mixing the fitting packages for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02?

Lay out the option-03 and option-04 cable-entry parts against 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 before assembly. Confirm plugs, reducer and seal-grip pieces against the selected record rather than against the appearance of the housing.

What machine detail is needed before 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 is installed?

Measure the 3/4-14 NPT machine interface, target position and available sleeve support for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02. Those dimensions determine whether the ordered probe can reach the target without an unsupported long assembly.

Why do the probe-cable lengths matter on 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02?

The 0.5 m and 1.0 m probe leads in 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 belong to different matched signal paths. Confirm the extension cable and Proximitor Sensor system length instead of treating the leads as a routing preference.

Where should troubleshooting begin if 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 shows an unstable gap?

Start with the housing represented by 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02: inspect sleeve locking, probe freedom, cable twist and the conductive target. Move to the probe/extension/sensor electrical path only after the mechanical gap is stable.

What should accompany a purchase request for 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02?

Send 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02, quantity, machine-case depth and a label or installation photo. These details preserve the two exact builds and reduce the risk of receiving a housing with the wrong reach or cable exit.

Moore06

Company Profile

Moore Automation

https://www.mvme.cn

Moore Automation coordinates industrial automation enquiries around complete article references, requested quantities and available product records. Product identification, document handling and commercial follow-up remain in one concise route.

Record clarityComplete model strings remain attached to the enquiry.

Document handlingAvailable technical files can follow the requested article.

Multi-brand scopePLC, DCS, drive and monitoring records can be coordinated.

Direct contactOne named contact supports follow-up.

Catalogue07

Selected Products

ABBPM554-RP

HIMAF9203A / K9203A

B&R5PC910.SX01-00

Woodward5501-367

Siemens6ES7241-1CH32-0XB0

HoneywellCC-TCNT04

FoxboroRH916FN

EmersonVE3051C1

EmersonVE3051C2

EmersonVE3051C3

EmersonVE3051C4

EmersonKJ2002X1-BA1

EmersonKJ2003X1-BB1

HIMAF3 DO 8 02

HoneywellTC-FXX102

MotorolaMVME55006E-0163

Siemens6ES7292-1AG30-0XA0

TRICONEX3301

ABBPM5072-R-ETH

Allen-Bradley1756-L64

Bently Nevada3500/61

EmersonKJ3002X1-BE1

HIMAF3221

HoneywellCC-GAOX11

MotorolaMVME61006E-0173

ABBSM560-S

EmersonKJ3222X1-EA1

Siemens6ES7517-3FP00-0AB0

Bently Nevada3500/92 136180-01

ABBDI561

HIMAF6705

HIMAM3421

HIMAF-BASE RACK 02 R

HIMAK9203A

HIMAX-COM 01 001

HIMAX-FAN 01

HIMAX-DI 32 02

HIMAX-DO 32 51

HIMAX-AI 32 02

HIMAX-CI 24 01

Siemens6ES7534-7QE00-0AB0

Bently Nevada330701-00-20-10-02-00

Siemens6ES7550-1AA01-0AB0

ABBTU515

Bently Nevada1900/65A-01-01-03-00-00

Siemens6ES7590-1AE80-0AA0

ABBSM560-S-FD-1-XC

Bently Nevada991-01-XX-01-00 MOD 288865-01

Siemens6ED1055-4MH08-0BA1

ABBCI855K01

Bently Nevada60R/BLK01

Siemens6ED1055-1CB10-0BA2

ABBSD831

ABBSD834

ABBTB850

Bently Nevada3701/60 177989-02

Bently Nevada330330-080-01-00

Bently Nevada32000-28-05-15-080-03-02

Bently NevadaSCOUT220-IS

Bently Nevada330104-00-04-10-02-05

Contact08

Contact & Enquiry

Moore AutomationSend the complete model and requested quantity.

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	Bently Nevada 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 \| 21000 Aluminum Proximity Probe Housing Assemblies
Item NO.	2929788
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-04

Bently Nevada 21000-28-05-15-039-03-02 / 21000-16-10-06-065-04-02 | 21000 Aluminum Proximity Probe Housing Assemblies Item NO.: 2929788