Target field
The 8 mm tip faces the conductive target and changes coil impedance as the physical gap changes.
1297163300 XL 8 mm proximity probe variant
Bently Nevada · Machinery monitoring hardware
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 | 3300 XL 8 mm proximity probe
A configuration-controlled 3300 XL 8 mm probe record used in an eddy-current proximity transducer chain.
System3300 XL 8 mm
Linear range2 mm
Scale factor7.87 V/mm
Product facts
Product Overview
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 is retained as a configuration-controlled 3300 XL 8 mm proximity probe record. In the matched transducer chain, the probe tip establishes the eddy-current field at the conductive target and the integral cable carries the gap-dependent response toward the extension cable and Proximitor Sensor.
The 3300 XL 8 mm family used by Bently Nevada 129716-XXX-040-15 MOD:166797-0133 provides a 2 mm linear measurement range with a nominal 7.87 V/mm scale factor when the complete probe, cable and Proximitor chain is matched. Both static gap position and dynamic vibration travel through the same electrical path.
Mechanical construction around Bently Nevada 129716-XXX-040-15 MOD:166797-0133 uses a molded PPS probe tip, a 303/304 stainless-steel case and 75-ohm FEP triaxial cable. Its gold-plated ClickLoc connector provides the corrosion-resistant handoff from the probe lead to the matched extension cable.
Verified data
Technical Specifications
| Technical item | 129716-XXX-040-15 MOD:166797-0133 |
|---|---|
| Brand | Bently Nevada |
| Product type | 3300 XL 8 mm proximity probe |
| Brand country | United States |
| Transducer system | 3300 XL 8 mm |
| Probe tip diameter | 8 mm |
| Linear range | 2 mm (80 mils) |
| Nominal scale factor | 7.87 V/mm (200 mV/mil) |
| Frequency response | DC to 10 kHz, system family |
| Probe-tip material | Polyphenylene sulfide (PPS) |
| Case material | AISI 303/304 stainless steel |
| Cable type | 75-ohm FEP triaxial |
| Minimum cable bend radius | 25.4 mm |
| Cable attachment strength | 330 N |
| Connector family | Gold-plated ClickLoc miniature coaxial |
| Standard probe temperature | -52 to +177 °C |
| Default target calibration | AISI 4140 steel |
Signal conversion
Product Functions: Eddy-Current Measurement
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 supplies the probe stage of the matched 3300 XL 8 mm measurement chain.
Cable transfer
The integral 75-ohm triaxial cable carries the returned response without converting it into the final monitor signal.
Proximitor output
The matched Proximitor Sensor supplies excitation and converts the probe response into the conditioned voltage used by the monitor.
Three-step installation
Installation & Integration: Matched 8 mm Signal Chain
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 must be routed and connected as one component of a length-matched 3300 XL 8 mm probe, extension-cable and Proximitor chain.
01
1. Route the probe lead
Carry the integral cable from the sensing point while maintaining at least the documented 25.4 mm bend radius and keeping the connector clear of contamination.
02
2. Join the ClickLoc connection
Mate the probe connector to the correct 3300 XL extension cable and tighten the two gold ClickLoc connectors finger-tight until the locking mechanism clicks; fit connector protection where required.
03
3. Complete the calibrated length
Confirm that the marked probe length plus extension-cable length equals the selected Proximitor Sensor system length, then connect the Proximitor output to the receiving monitor.
Practical selection and use
Frequently Asked Questions
How does Bently Nevada 129716-XXX-040-15 MOD:166797-0133 pass the probe response to the extension cable?
The 75-ohm FEP triaxial lead of Bently Nevada 129716-XXX-040-15 MOD:166797-0133 terminates in a gold-plated ClickLoc miniature coaxial connector, which locks to the matched extension-cable path.
Which system components must match Bently Nevada 129716-XXX-040-15 MOD:166797-0133?
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 belongs in a complete 3300 XL 8 mm chain with the applicable extension cable and Proximitor Sensor. Probe length plus extension-cable length must agree with the selected system length.
What should be checked if Bently Nevada 129716-XXX-040-15 MOD:166797-0133 shows a weak or unstable signal?
For Bently Nevada 129716-XXX-040-15 MOD:166797-0133, inspect target gap, cable routing, ClickLoc engagement and the extension-cable connection before changing electronics. A damaged bend or loose connector can interrupt the returned probe response.
How close may the cable of Bently Nevada 129716-XXX-040-15 MOD:166797-0133 be bent?
Maintain at least a 25.4 mm bend radius for the 75-ohm cable on Bently Nevada 129716-XXX-040-15 MOD:166797-0133. A sharper bend can mechanically stress the triaxial construction and connector transition.
Which target material is the default reference for Bently Nevada 129716-XXX-040-15 MOD:166797-0133?
The standard 3300 XL 8 mm performance basis used with Bently Nevada 129716-XXX-040-15 MOD:166797-0133 is AISI 4140 steel. Other target materials require the matching calibrated system rather than an assumed scale factor.
What temperature envelope applies to the standard probe family used by Bently Nevada 129716-XXX-040-15 MOD:166797-0133?
The standard 3300 XL 8 mm probe family used by Bently Nevada 129716-XXX-040-15 MOD:166797-0133 has a -52 to +177 °C operating and storage envelope.
Moore Automation
Our Advantages
Moore Automation
https://www.mvme.cn/Moore Automation keeps product configuration, quantity, destination and supporting technical files together throughout the enquiry. This reduces the risk that a partial model string is separated from the request it belongs to.
Customers can provide photos of labels, connectors or installed hardware when a configuration field is unclear. The response can then reference the same evidence used during product identification.
Model disciplineComplete strings remain visible
Technical contextPhotos and drawings accepted
Responsive handlingCommercial questions routed directly
Mixed brands
Recommended Products
- Siemens6ES7134-4JB00-0AB0
- ABBACS310-03E-34A1-4
- Mitsubishi ElectricFX3SA-30MT-CM
- OmronCS1W-PRM21
- GEIC22-050A1TSP1
- HoneywellCC-PSP401
- Schneider Electric140CPU67260
- Rockwell Automation2711P-RN8
- WAGO750-513
- YaskawaSGDB-15VD
- BeckhoffBK6425
- LenzeEVS9322-E
- Siemens6GK5005-0BA00-1AA3
- ABBACS510-01-09A4-4
- Mitsubishi ElectricFX2N-485-BD
- OmronC500-IM211
- GEIS215UCVEH2AC
- HoneywellFC-2910V
- Schneider Electric140CRP31200
- Rockwell Automation1771-SDN
- WAGO750-343
- YaskawaSGDB-05VN
- BeckhoffBK3150
- LenzeE82ZAFBC001
- Siemens7KM9300-0AE00-0AA0
- ABBPM5012-T-ETH
- Mitsubishi ElectricFR-D740-012-EC
- OmronC500-ID213
- GEIC695ACC403-BA
- HoneywellFC-SAI-1620M
- Schneider Electric140CPU67160
- Rockwell Automation1756-OB16I
- WAGO750-P5-G5-S5-HI-A1-R
- YaskawaSGDB-10VDY1
- BeckhoffEL1808
- LenzeE82ZAFSC
- Siemens6GK60082AS100U
- ABBACS355-03E-07A3-4
- Mitsubishi ElectricAJ65BT-R2
- OmronCP1L-M60DT-D
- GEIC20
- HoneywellTK-PRS021
- Schneider ElectricATV312H075N4
- Rockwell Automation2711P-B7C4D8
- WAGO753-400/001-000
- YaskawaCIMR-J7ACB0P1
- BeckhoffEL9180
- LenzeEVS9325-EP
- Siemens1FT5072-0AC01-2-Z
- ABBACS355-03E-12A5-4
- Mitsubishi ElectricMR-JHSCBL5M-L
- OmronCJ1W-MD232
- GEIS200EPCTG1A
- HoneywellCC-100B
- Schneider ElectricBMXXBP0800
- Rockwell Automation1771-P4S
- WAGO753-647
- YaskawaSGDV-OCA01A
- BeckhoffBK1120
- LenzeE82ZAFD
Direct enquiry
Contact Information
Moore Automation
Talk with our team
Technical product enquiries and purchasing questions are handled through the channels shown here.
ManagerLeonia
Emailsales@mvme.cnWhatsApp+86 180 3017 5807
No related record found