Armored long run
Stainless-steel armor protects the 25 m assembly along the route while the underlying conductors remain part of the sensor signal path.
XABently Nevada
Bently Nevada 106765-25 Velomitor XA 25 m Interconnect Cable
25 m maximum length22 AWG conductorsstainless-steel armor
01
Product Description
The Bently Nevada 106765-25 is the 25 m interconnect cable for the 330525 Velomitor XA piezo-velocity sensor. One end mates with the sensor connector and splash-resistant boot arrangement, while the opposite end separates into labeled `A`, `B` and `SHLD` conductors for field termination.
Mechanical protection on 106765-25 comes from stainless-steel armor over the cable, with clear shrink tubing identifying the transition and 22 AWG conductors carrying the balanced signal and shield connection. At 25 m it uses the maximum published order length, so the complete assembly is routed and terminated without field shortening at the molded sensor interface.
02
Technical Specifications
| Technical Item | 106765-25 |
|---|---|
| Brand | Bently Nevada |
| Product Type | Velomitor XA interconnect cable |
| Product Origin | USA |
| Compatible Sensor Family | 330525 Velomitor XA piezo-velocity sensor |
| Official Order Structure | 106765-AA |
| Length Option | 25 |
| Cable Length | 25 m (82 ft) |
| Published Length Range | 1…25 m |
| Order Increment | 3 m |
| Conductor Size | 0.382 mm² (22 AWG) |
| Mechanical Protection | Stainless-steel armor over cable |
| Sensor-end Protection | Splash-resistant boot with top and bottom clamps |
| Field Leads | A — white; B — black; SHLD — green |
| Lead Identification | Clear shrink tubing |
| Overall-Length Tolerance | ±200 mm (±7.8 in) |
03
Key Features — 25 m Cable Construction
106765-25 combines the maximum listed cable length with an armored outer path and identified field conductors.
Three identified leads
White A, black B and green SHLD conductors separate at the field end for correct signal polarity and shield termination.
Booted sensor interface
The splash-resistant boot and clamps cover the sensor connection and control moisture entry at the mated interface.
04
System Integration — Velomitor XA Termination
106765-25 links one 330525 Velomitor XA sensor to the local terminal or monitor field wiring without converting the velocity signal inside the cable.
Sensor receptacle match
The assembled connector mates with the Velomitor XA receptacle and remains mechanically supported by the boot system.
Local terminal path
The three field leads can land on the dedicated terminal block or within the terminal housing used to join monitor wiring.
Two-cable housing capacity
When the 106769 terminal housing is used, one housing can accommodate as many as two Velomitor XA sensor cables.
05
Frequently Asked Questions
What should be checked when 106765-25 gives an open or missing signal over the 25 m run?
Verify the white A and black B conductors at both ends, confirm the green SHLD termination, and inspect the sensor boot and field-lead transition before replacing the cable.
How is moisture kept out of the 106765-25 sensor connection?
Seat the fluorosilicone boot over the connection and secure both clamps on clean surfaces. A loose boot can let splash reach the connector even when the armored run is intact.
Can excess length be cut from 106765-25 in the field?
Do not shorten the molded sensor end or alter the assembly. Route and support the 25 m cable correctly, or order the documented length that fits the installation.
Why must the armor of 106765-25 be supported?
The armor protects the cable but adds mass. Clips or tray support prevent the 25 m run from loading the Velomitor XA connector and the exposed field leads.
Can two 106765-25 cables share one terminal housing?
Yes, the compatible 106769 housing can accept up to two Velomitor XA cable assemblies, provided each A, B and SHLD termination remains separately identified.
What causes reversed or noisy output after terminating 106765-25?
Swapped A/B conductors reverse polarity, while an incorrect shield landing can increase noise. Preserve the white A, black B and green SHLD identification at the terminal end.
06
Customer Support
One account contact coordinates catalog checks, quantity, quotation timing and shipment updates so the same technical details stay visible.
Catalog verificationThe full model and suffix stay visible.
Original productsIndustrial components are supplied with traceable identification.
One-year warrantyCoverage remains linked to the order record.
Global deliveryExport packing and tracking are coordinated.
07
Recommended Products
| Bosch RexrothHMV01.1R-W0045-A-07-NNNN | Emerson5X00070G03 | FoxboroP0917YZ |
| GEIC698CMM001 | HIMA20/8 | ICS TriplexT8431C |
| MotorolaMVME2300 | Siemens6ES7231-5ND32-0XB0 | EmersonMMS6220 |
| FoxboroP0916FN | GEIC693PWR322 | ICS TriplexT8830 |
| MotorolaMVME51105E-2263 | Siemens6ES7512-1DK01-0AB0 | Triconex3301 |
| Vibro-Meter200-595-072-122 | Woodward5466-316 | ABBACS580-01-046A-4 |
| Allen-Bradley1785-KE | Bently Nevada1900/65A-01-01-03-00-01 | EmersonMMS6250 |
| FoxboroRH916FN | GEIC693PWR330 | ICS TriplexT8850 |
| MotorolaMVME5500 | Siemens6ES7513-1AL02-0AB0 | Triconex3301S2 |
| Vibro-Meter200-595-046-114 | Woodward5466-326 | ABBACS580-01-062A-4 |
| Allen-Bradley2715P-T15CD-K | Bently Nevada2300/20 | EmersonMMS6310 |
| GEIC693PWR331 | MotorolaMVME5500-0163 | Siemens6ES7513-1FL02-0AB0 |
| Triconex3351 | Vibro-Meter200-595-100-031 | Woodward5466-1045 |
| ABBACS580-01-073A-4 | Allen-Bradley2711P-T15C22D9P | Bently Nevada2300/25 |
| EmersonMMS6312 | GEIC693CHS391 | MotorolaMVME55006E-0161 |
| Siemens6ES7515-2AM02-0AB0 | Triconex3351S2 | Vibro-Meter200-595-100-014 |
| Woodward5466-1141 | ABBACS580-01-088A-4 | Allen-Bradley2711P-T12W22D9P |
| Bently Nevada2300/25-00 | EmersonMMS6410 | GEIC693CHS397 |
| MotorolaMVME55006E-0161R | Siemens6ES7515-2FM02-0AB0 | Triconex3401 |
| Vibro-Meter200-595-031-111 | Woodward5466-1145 | ABBACS580-01-106A-4 |
No related record found