Welcome to Moore Automation Limited
|
Copy and share this link on social network or send it to your friends
Copy| Product Name | Baker Hughes Bently Nevada 330103-00-08-10-01-00 3300 XL 8 mm Proximity Probe |
| Item NO. | 2915655 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-10-09 |
8 mm proximity transducer system · metric standard mount
The Baker Hughes Bently Nevada 330103-00-08-10-01-00 is a metric, standard-mount 3300 XL 8 mm proximity probe with an M10 × 1 threaded case and no cable armor. It forms the sensing end of a 3300 XL 8 mm proximity transducer system, facing a conductive machine target while its threaded body fixes the probe at the required mechanical gap.
Within the measurement chain, the Bently Nevada 330103-00-08-10-01-00 carries the probe signal through its one-metre triaxial lead and protected ClickLoc connector to the matching extension cable and Proximitor Sensor. The Proximitor Sensor converts the probe-to-target gap into an output voltage that represents static shaft position and dynamic vibration, so the probe, cable and signal conditioner remain one coordinated electrical system.
| Technical Item | 330103-00-08-10-01-00 |
|---|---|
| Brand | Baker Hughes Bently Nevada |
| Product Type | 3300 XL 8 mm proximity probe |
| Brand Country | United States |
| Probe Style | Metric standard mount, without armor |
| Case Thread | M10 × 1 |
| Unthreaded Length | 0 mm |
| Case Length | 80 mm |
| Total Probe Length | 1.0 m |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Cable Construction | 75 Ω triaxial, FEP-insulated standard cable |
| Connector Arrangement | Miniature coaxial ClickLoc connector with connector protector |
| Maximum Thread Engagement | 15 mm (0.59 in) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Operating and Storage Temperature | −52 to +177 °C (−62 to +350 °F) |
The Bently Nevada 330103-00-08-10-01-00 uses its threaded stainless-steel case to establish a stable probe position while keeping the sensing tip, wrench flats and cable transition in separate mechanical roles.
The zero unthreaded-length code places the start of the M10 × 1 case thread immediately behind the probe-tip shoulder. Mounting depth is therefore set through the threaded case and locknut position rather than through a long smooth nose.
The mounting hole or bracket must keep thread engagement within 15 mm. That limit lets the body be secured without allowing the support hardware to extend into the cable-transition region.
The 8 mm wrench flats are the torque interface for this metric probe. Installation force belongs on those flats and the locknuts, leaving the probe cable and connector free from twisting load.
The Bently Nevada 330103-00-08-10-01-00 routes the target-gap signal through three defined interfaces; keeping those interfaces in the correct 3300 XL 8 mm family preserves the electrical relationship used by the Proximitor Sensor.
The 8 mm tip develops the proximity signal, and the attached 75 Ω FEP-insulated triaxial cable carries it away from the machine surface. Routing must preserve the 25.4 mm minimum bend radius instead of folding the lead at the case exit.
The miniature coaxial ClickLoc connector mates the probe lead to the corresponding extension cable. Its connector protector covers the joined interface; it does not change the required cable family or electrical length.
The extension cable completes the path to a 3300 XL 8 mm Proximitor Sensor. That sensor supplies the probe circuit and provides the voltage output used by the monitoring channel for position and vibration measurement.
It identifies a 330103 metric probe with zero unthreaded length, an 80 mm case, a 1.0 m lead, a protected miniature ClickLoc connector and no requested agency approval. Keeping every suffix on the enquiry prevents a different case, cable or connector option from being supplied.
Use a 3300 XL 8 mm extension cable that completes the electrical length required by the paired 3300 XL 8 mm Proximitor Sensor. NSv, 11 mm and other proximity-system cable families are not interchangeable with this probe chain.
Use the M10 × 1 threaded case and locknuts to establish the operating gap while keeping thread engagement at or below 15 mm. Apply installation torque at the 8 mm wrench flats rather than turning the cable or connector.
The standard scale factor is based on AISI 4140 steel. A different conductive target material can change the electrical response, so the complete probe, extension cable, Proximitor Sensor and target combination must be checked for that material.
It covers the mated miniature ClickLoc connection between the probe and extension cable. The protector supports the physical integrity of that junction but does not correct an incompatible cable or an incomplete connection.
No; the standard cable has a 25.4 mm minimum bend radius. Keep that radius through the routing path and avoid pulling or twisting at the case exit and ClickLoc junction.
MOORE AUTOMATION
https://www.mvme.cn/Moore Automation checks the complete manufacturer and catalog number against the enquiry before quotation, then keeps that model identity attached to order handling and shipment communication. The review helps separate close Bently Nevada probe variants whose case, cable and connector suffixes are not interchangeable.
www.mvme.cn
| Brand | Model | Brand | Model | Brand | Model |
|---|---|---|---|---|---|
| Siemens | 6ES7222-1HF32-0XB0 | Siemens | 6ES7223-1BH32-0XB0 | Siemens | 6ES7223-1PH32-0XB0 |
| Foxboro | FBI100 | Foxboro | FCM2F2 | Foxboro | FCM2F10 |
| HIMA | F35 03/4 | HIMA | F8650X | HIMA | F3330 |
| Yokogawa | AAI543-H60/K4A00 | Yokogawa | AAI543-H50/K4A00 | Yokogawa | SDV144-S63 |
| Motorola | MVME2604-1131A | Motorola | MVME2604-1141 | Motorola | MVME2604-1151A |
| TRICONEX | 3009X | TRICONEX | 8120X | TRICONEX | 4703X |
| Vibro-Meter | 200-560-000-1HH | Vibro-Meter | 200-510-SSS-1HH | Vibro-Meter | 620-024-100-1HH |
| ABB | PM5012-R-ETH | ABB | PM5032-R-ETH | ABB | PM5052-R-ETH |
| B&R | 4PPC70.0573-20W | B&R | 4PP320.0571-39 | B&R | 5AP920.1505-01 |
| Bosch Rexroth | HCS03.1E-W0210-A-05-NNBV | Bosch Rexroth | TDM7.1-050-300-W1 | Bosch Rexroth | TDA1.1-100-3-A00 |
| Siemens | 6ES7222-1HH32-0XB0 | Siemens | 6ES7223-1BL32-0XB0 | Siemens | 6ES7223-1PL32-0XB0 |
| Foxboro | FBI200 | Foxboro | FCM2F4 | Foxboro | FPS480-24 |
| HIMA | F35 030 11 | HIMA | F7131 | HIMA | F6217 |
| Yokogawa | AAV141-S50/K4A00 | Yokogawa | AAI143-S50/A4S00 | Yokogawa | SAI533-H63/PRP |
| Motorola | MVME2604-1131B | Motorola | MVME2604-1141A | Motorola | MVME2604-1161 |
| TRICONEX | 4610X | TRICONEX | 4701X | TRICONEX | 3626X |
| Vibro-Meter | CA201-A2A50000780 | Vibro-Meter | 601-041-A1 | Vibro-Meter | 601-050-A0 |
| ABB | PM5032-T-ETH | ABB | PM5052-T-ETH | ABB | PM5072-T-2ETH |
| B&R | 4PP220.0571-45 | B&R | 5AP920.1043-01 | B&R | 5AP920.1906-01 |
| Bosch Rexroth | TDM7.1-030-300-W1 | Bosch Rexroth | TDM7.1-100-300-W1 | Bosch Rexroth | HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW |
Send the complete model and requested quantity for an exact enquiry record.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found