Welcome to Moore Automation Limited

0
Loadding...
 

sales@mvme.cn    Phone: +86 18030175807

Home>B&R>B&R X20AI8321 X20 Current Analog Input Module
B&R X20AI8321 X20 Current Analog Input Module

B&R X20AI8321 X20 Current Analog Input Module Item NO.: 2942570

Write a Review
US$ 1.00
Quantity
Stock ( 28 )

Copy and share this link on social network or send it to your friends

Copy
Request Price & AvailabilitySend the part number and quantity. Our team will confirm stock, condition, lead time and the best quotation.
  • MOQ: 1 piece
  • International shipping
  • 1-year warranty on eligible items
  • Fast response during business hours
Product Name B&R X20AI8321 X20 Current Analog Input Module
Item NO. 2942570
Weight 0.1 kg = 0.2205 lb = 3.5274 oz
Category B&R
Brand B&R
Creation Time 2026-11-19

B&R X20AI8321 X20 Current Analog Input Module
AIX20 Module

ANALOG INPUT / CURRENT LOOPS

B&R X20AI8321 X20 Current Analog Input Module

8current inputs
01

Product Introduction

B&R X20AI8321 is an eight-channel current analog input module for the B&R X20 I/O system. It converts 0–20 mA or 4–20 mA field signals into controller data, using differential input paths and a shared module architecture that supports active transmitters and passive two-wire sensors with the appropriate external power supply.

The eight channels of X20AI8321 are wired as current loops rather than voltage sources. Current enters each AI+x I terminal and returns through AI-x I, while transmitter power remains part of the field circuit; the input circuit shunt turns loop current into a value for the A/D converter and the channel LED reflects converter and range status.

Before values leave X20AI8321, the configurable filter can limit an input step and apply low-pass processing at a fixed 1 ms filter sampling time. This processing is asynchronous to the X2X cycle, so an online value should be interpreted with the selected filter, transmitter response and channel diagnostics rather than with bus timing alone.

02

Technical Information

Brand B&R
Model X20AI8321
Product Name X20 Current Analog Input Module
Country Austria
Input Quantity 8
Signal Ranges 0–20 mA or 4–20 mA
Input Type Differential current input
Converter Resolution 12 bit
Input Connection AI+x I and AI-x I per channel
Sensor Wiring Active 4-wire or passive 2-wire with external supply
Hardware Filter Third-order low-pass, 1 kHz cutoff
Configurable Filter Low-pass processing with input ramp limiting
Filter Sampling Fixed 1 ms, asynchronous to X2X cycle
Diagnostics Open line, overflow / underflow and converter status
Isolation Input group isolated from bus
Operating Temperature -25 to 60°C horizontal; -25 to 50°C vertical
Required Station Parts X20BM11 and X20TB12
Degree of Protection IP20
03

Current-Loop Wiring Patterns

The input measures loop current; transmitter power and return wiring determine whether that current can flow.

01

Active transmitter loop

An active four-wire transmitter supplies its own output energy. X20AI8321 is placed in the signal path through the channel current terminals, and the transmitter supply reference is maintained according to the field circuit design.

02

Passive two-wire loop

A passive sensor needs an external supply in series with the transmitter and X20AI8321 input. Missing loop power can appear as an open or zero-current condition even though the sensor and module are both physically connected.

03

Channel return integrity

Each current path needs a complete return. Measuring voltage at one terminal does not prove loop current; use a series current test or loop calibrator and keep the channel return separate from unrelated cabinet commons.

04

Value Conditioning and Validation

The module conditions current data before the application converts it to engineering units.

01

Ramp-limited disturbance rejection

Input ramp limiting rejects a step larger than the configured boundary before low-pass filtering. The boundary must be set above the fastest legitimate transmitter change so a real process upset is not flattened into a slow ramp.

02

Asynchronous filter timing

The 1 ms filter sampling is not synchronized to the X2X cycle. Small timing variation between the physical current change and a cyclic controller sample is therefore expected and should be separated from unstable field wiring.

03

Status-gated scaling

Open-line, range and converter status are evaluated before 0–20 mA or 4–20 mA scaling. An invalid raw value should drive a defined application diagnostic instead of being converted directly into a process value.

05

Frequently Asked Questions

When X20AI8321 reads zero from a passive two-wire transmitter, where should loop power be checked?

X20AI8321 does not power a passive two-wire loop by itself; check the external loop supply, polarity, AI+x I / AI-x I path and transmitter continuity.

Which X20AI8321 settings define a valid 4–20 mA measurement path?

Set the X20AI8321 channel for the required current range, confirm the correct current terminals, then scale raw data only after channel status reports a valid conversion.

What should be checked when one X20AI8321 channel reports open line?

On X20AI8321, check loop supply, series wiring, transmitter polarity, terminal seating and return continuity for that channel before changing filter or scaling parameters.

How does X20AI8321 filtering change the response to a loop-calibrator step?

X20AI8321 applies configurable ramp limiting and low-pass filtering with a 1 ms asynchronous sample, so compare the selected filter settings with the expected transmitter response.

Can voltage signals be connected to X20AI8321?

X20AI8321 is a current-input module for 0–20 mA or 4–20 mA loops; use a documented voltage-input module instead of applying a voltage source to the current terminal path.

Why do two X20AI8321 channels with the same current show different engineering values?

If raw current and status agree on X20AI8321, compare the controller scaling, offset and channel range settings; the module cannot correct different application conversion formulas.

06

Customer Support Workflow

Moore Automation

https://www.mvme.cn

Moore Automation keeps technical questions and order details connected to the same customer enquiry record.

Single enquiry recordModel, quantity and requested condition remain together.
Question handoffTechnical and commercial notes are not separated from the requested part.
Response trackingClarifications and updated requirements are recorded against the enquiry.
Dispatch follow-throughShipment information refers back to the confirmed order lines.

No related record found

You May Also Like

Copyright © 2004–2026 www.mvme.cn. All rights reserved.

Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.