Allen-Bradley · PanelView 5510
Allen-Bradley 2715P-T12WD PanelView 5510 12.1-inch Graphic Terminal
12.1-inch WXGA resistive-touch HMI with dual Ethernet and 24 V DC input.
System Overview
Allen-Bradley 2715P-T12WD is a 12.1-inch widescreen PanelView 5510 graphic terminal. Its colour TFT LCD provides 1200 x 800 WXGA, 16:10 graphics and a 261 by 163 mm viewing area, while the resistive touchscreen is paired with a menu-navigation button.
The terminal belongs to the Studio 5000-based PanelView 5510 environment. View Designer creates the HMI project for a selected terminal and Logix Designer provides the controller-logic component; a project can be converted between 5510 terminal sizes within that platform.
Two 10/100Base-T Auto MDI/MDI-X ports on 2715P-T12WD support DLR, linear and star topologies. The terminal also has 1 GB RAM, 1 GB nonvolatile project storage, SD external storage, USB host/device interfaces and status indicators for STS and ERR.
The 12.1-inch resistive-touch model uses an approximate 218 by 312 mm cutout, 246 by 340 mm front dimensions, 69.5 mm overall depth and 64 mm mounted depth. Power input is 24 V DC nominal, 18 to 30 V DC, with a 24 W maximum figure.
Configuration Reference
| Technical item | 2715P-T12WD |
|---|---|
| Brand | Allen-Bradley |
| Product type | PanelView 5510 graphic terminal |
| Display | 12.1 in. widescreen color TFT LCD |
| Resolution | 1200 x 800 WXGA, 16:10 |
| Viewing area | 261 x 163 mm |
| Operator input | Resistive touch plus menu navigation button |
| Ethernet | Two 10/100Base-T Auto MDI/MDI-X ports |
| Network topology | DLR, linear or star |
| Memory | 1 GB RAM; 1 GB nonvolatile project storage |
| Status indicators | STS green; ERR red |
| Power | 24 V DC nominal, 18 to 30 V DC; 24 W maximum |
| Cutout | 218 x 312 mm, approximate |
WXGA project canvas
Display and project scope
WXGA project canvas
2715P-T12WD uses a 12.1-inch, 1200 x 800 WXGA screen with a 16:10 aspect ratio. That screen geometry is a terminal-specific design target when a View Designer project is created or converted.
The 261 by 163 mm view area and resistive touch with menu-navigation button define the physical HMI interface for this specific wide-screen configuration.
- 12.1 in. 16:10 display
- 1200 x 800 WXGA
- Resistive touch plus navigation
Wide-panel installation path
Mounting and communications
Wide-panel installation path
The 218 by 312 mm cutout and 246 by 340 mm terminal front provide the mechanical basis for 2715P-T12WD panel integration. The terminal's two Ethernet ports serve DLR, linear or star communication layouts.
The official dimension figure preserves the resistive-touch terminal and cutout data used for the 6.5-, 7-, 9-, 10.4-, 12.1- and 15-inch terminal family.
- 218 x 312 mm cutout
- DLR / linear / star
- Official 5510 dimension drawing
Frequently Asked Questions
A wide HMI project is being scaled from another size; which 12.1-inch WXGA canvas and viewing area define the target (2715P-T12WD)?
The published configuration confirms that 2715P-T12WD has a 1200 x 800 WXGA, 16:10 display and a 261 x 163 mm viewing area for its View Designer project target.
A cabinet has to support ring, line or star wiring; how do the two Ethernet ports support that decision (2715P-T12WD)?
For a replacement decision, the listed data shows that 2715P-T12WD has two 10/100Base-T Auto MDI/MDI-X ports for DLR, linear or star topology.
Before a 12.1-inch replacement is released to fabrication, which cutout and front dimensions must be compared with the door (2715P-T12WD)?
The installation check is resolved by the fact that 2715P-T12WD uses an approximate 218 x 312 mm cutout, with 246 x 340 mm terminal-front dimensions.
When controls and HMI engineers share a Studio 5000 project, which tool owns the visualization and which owns controller logic (2715P-T12WD)?
In the official technical record, 2715P-T12WD uses View Designer for the HMI project and Logix Designer for the related controller logic in the Studio 5000 environment.
If a commissioning engineer needs project media plus fault indication, which storage interfaces and status indicators are available (2715P-T12WD)?
The relevant hardware boundary is that 2715P-T12WD has 1 GB RAM, 1 GB nonvolatile project storage, one SD slot and USB host/device connections.
A DC distribution calculation is being updated for a wide terminal; which published voltage range and wattage should be entered (2715P-T12WD)?
For engineering selection, the documented result is that 2715P-T12WD uses 24 V DC nominal, 18 to 30 V DC input and has a 24 W maximum power-consumption value.
Moore Automation
Moore Automation
International customer communication
Moore Automation works with customer enquiries that identify a manufacturer model and requested quantity. The contact details below provide direct channels for follow-up.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
Related Product List
- Siemens 3RT1054-1AF36
- Omron CPU201E
- Mitsubishi Electric QJ71C24N
- Yaskawa CIMR-XCACB0P1
- Danfoss 131B0027
- Allen-Bradley 150-F108NBD
- GE IC752SPL013
- B&R 8B0C0320HC00.00A-1
- B&R 4XP0000.00-K95
- B&R NT100-RE-DN/+ML
- B&R NT100-RE-DP/+ML
- B&R NT50-DN-EN
- B&R NT50-CC-EN
- B&R NT50-DP-EN
- B&R CIFX50-RE
- B&R CIFX50E-RE
- B&R CIF50-DNM
- B&R CIF50-ASM
- B&R NL51N-DPL
- B&R CIF50-DPS
- B&R X20S02530
- B&R X20SO2530
- B&R OAK310.1
- B&R X20TB1F
- B&R 4PP420.0571-K16
- B&R 5PP520.0573-K04
- B&R X67DM9321.L12
- B&R 3AO350.6
- B&R 31F761.9
- B&R 7D1135.70
- B&R DI135
- B&R 7DI135.70
- B&R 7EX481.50-1
- B&R EX470
- B&R 7EX470.50-1
- B&R DM435
- B&R DO435
- B&R 7DO435.7
- B&R AF101
- B&R 3XP152.60-2
- B&R 3XP152.60-1
- B&R 4E0021.01-590
- B&R ZX-TDS10T
- B&R ZX-TDS04T
- B&R MM432
- B&R DI435
- B&R 7D1435.7
- B&R 7DI435.7
- B&R DI439
- B&R 7DI439.7
- B&R EX270
- B&R 7EX270.50-1
- B&R DO720
- B&R CM411
- B&R 7D0720.0
- B&R 7DO720.7
- B&R X20CP3684
- B&R 5DLSDL.1001-00
- B&R 31F672.9
- B&R IF672
No related record found