Command selection
Start, stop and speed commands can be assigned to the keypad, control terminals or embedded EtherNet/IP interface.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Allen-Bradley 25B-B2P5N104 / 25B-B8P0N104 / 25B-B5P0N104 PowerFlex 525 AC Drives |
| Item NO. | 2910626 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | AB |
| Brand | ALLEN-BRADLEY |
| Creation Time | 2026-09-23 |
Allen-Bradley 25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 are PowerFlex 525 adjustable-frequency AC drives that convert 200…240 V three-phase input into controlled three-phase motor output. Within a motor-control system, 25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 regulate motor speed and torque from local, terminal or EtherNet/IP commands.
Incoming power reaches 25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 through R/L1, S/L2 and T/L3, passes through the drive power stage, and leaves through U/T1, V/T2 and W/T3. The three Frame A drives share that power path but provide different outputs: 2.5 A, 8.0 A and 5.0 A for 0.5 HP, 2 HP and 1 HP motors.
For control, 25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 combine an integral keypad with digital and analog terminals, relay contacts and embedded EtherNet/IP. Command data can enter through the control terminals or network adapter, while operating state and drive data return through the configured outputs and EtherNet/IP connection.
| Technical Item | 25B-B2P5N104 | 25B-B8P0N104 | 25B-B5P0N104 |
|---|---|---|---|
| Brand | Allen-Bradley | ||
| Product Type | PowerFlex 525 AC Drive | ||
| Country of Origin | Multiple | ||
| Enclosure | IP20 NEMA / Open Type | ||
| Integral EMC Filter | None (N104 configuration) | ||
| Embedded Network | EtherNet/IP | ||
| Operator Interface | Integral keypad, speed potentiometer and LED display | ||
| Dynamic Brake | Brake IGBT included | ||
| Input Supply | 200…240 V AC, 3-phase | ||
| Output Current | 2.5 A | 8.0 A | 5.0 A |
| Motor Rating | 0.4 kW / 0.5 HP | 1.5 kW / 2 HP | 0.75 kW / 1 HP |
| Frame | Frame A | ||
| Mounting | Vertical | ||
25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 coordinate command selection, motor-frequency control and status output inside one PowerFlex 525 unit.
Start, stop and speed commands can be assigned to the keypad, control terminals or embedded EtherNet/IP interface.
The drive power stage converts the fixed-frequency AC supply into variable-frequency output at U/T1, V/T2 and W/T3.
Relay, analog and network data paths can report configured operating conditions to the connected control system.
The embedded EtherNet/IP adapter in 25B-B2P5N104, 25B-B8P0N104 and 25B-B5P0N104 links drive commands and operating data to an Ethernet control network.
BOOTP or the embedded-adapter parameters provide the IP address, subnet mask and gateway values.
The controller sends command data to the adapter and receives drive status through the established EtherNet/IP connection.
Terminal C1 is tied to the RJ45 shield and connects to clean ground for the specified star-topology grounding arrangement.
The three drives provide 2.5 A, 8.0 A and 5.0 A outputs respectively. Compare the complete catalog number with the motor-current requirement before selecting the rating.
Yes. Every catalog number in this group is assigned to Frame A even though the output ratings differ.
Use BOOTP or the embedded-adapter parameters to assign the EtherNet/IP address. A manual change becomes active after reset or a power cycle.
Each listed drive includes a brake IGBT. The external braking circuit, when used, must follow the terminal and resistor limits for the selected drive.
N104 identifies an IP20 NEMA / Open Type configuration without an integral EMC filter. It must be read as part of the complete catalog number.
Control terminal 01 is always a stop input. Its circuit and the configured stopping method must both permit operation before a start command can take effect.
Moore Automation supplies industrial automation and control-system spare parts to customers handling planned maintenance, urgent replacement and project procurement.
Catalog numbers are checked as complete identities before quotation.
Enquiries are handled through named sales contact Leonia.
Orders are packed for international transit.
Email and WhatsApp details remain visible on the page.
Send the complete catalog number and required quantity for quotation.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found