ABBSymphony Plus

ABB SPC810e / SPC810ev / SPC810ev2K02 Symphony Plus Process Controllers

Product identitySDev

Product identity

Product Details

ABB SPC810e / SPC810ev / SPC810ev2K02 identify related Symphony Plus process-controller forms rather than one interchangeable order record. SPC810e is the Evolution-mount controller module, SPC810ev is the Harmony Rack form, and SPC810ev2K02 is the redundant serial-communication kit built around two SPC810ev modules.

The controller platform used by ABB SPC810e / SPC810ev / SPC810ev2K02 provides a 250 MHz MCF54418 processor, 128 MB RAM, 2 MB MRAM and 4 MB flash. It supports up to 30,000 function blocks and is specified for closed-loop control of up to 5,000 I/O points in under 250 ms.

Mounting and accessories distinguish ABB SPC810e / SPC810ev / SPC810ev2K02. SPC810e uses Evolution bases or DIN-rail arrangements; SPC810ev fits Harmony Rack module-mounting units; SPC810ev2K02 adds the redundant pair, PBA812 serial adapters, bus terminators and the redundant link kit required for the serial configuration.

ABB Symphony Plus catalog crop showing the SPC810ev controller and SPC810ev2K02 serial kit composition

Technical record

Specifications Overview

Specification	SPC810e	SPC810ev	SPC810ev2K02
Brand	ABB	ABB	ABB
Product Name	Evolution Process Controller	Harmony Rack Process Controller	Redundant Serial Controller Kit
Country	Not specified	Not specified	Not specified
Series	Symphony Plus SDe	Symphony Plus SDev	Symphony Plus SDev
Processor	MCF54418, 250 MHz	MCF54418, 250 MHz	2 × SPC810ev, 250 MHz each
DRAM	128 MB	128 MB	2 × 128 MB
MRAM / Flash	2 MB / 4 MB	2 MB / 4 MB	2 × (2 MB / 4 MB)
Function blocks	Up to 30,000	Up to 30,000	Up to 30,000 per active controller
Closed-loop capacity	5,000 I/O under 250 ms	5,000 I/O under 250 ms	5,000 I/O under 250 ms
Mounting	Evolution base or DIN rail	1 HR slot in MMU	2 adjacent HR slots
Redundancy	Module; arrangement dependent	Non-redundant module	Yes
Communication adapter	Base-dependent	PBA811 or PBA812	2 × PBA812 for serial kit
Operating temperature	-40 to +70 °C	-40 to +70 °C	-40 to +70 °C
Article number	Base/order configuration dependent	7PAA001436R11	7PAA006320R1201
Weight	Base-dependent	0.585 kg including base	1.00 kg including base

Evolution and Harmony Rack

Controller Form Factors

The processor capability is related, but the mechanical carrier and I/O connection path change between the e and ev forms.

SPC810e mounting

SPC810e is arranged on Evolution mounting hardware or a supported DIN-rail base. The base supplies the plant-network and HN800 connection context.

SPC810ev mounting

SPC810ev occupies an existing Harmony Rack MMU position and connects to rack I/O through the expander bus while external adapters provide other communication paths.

Selection boundary

A shared processor family does not make the forms mechanically interchangeable. Cabinet, base, front-plate and bus requirements decide which identity belongs in the station.

SPC810ev2K02 bundle

Redundant Serial Kit Composition

The SPC810ev2K02 identity describes a complete redundant serial kit, not a single loose controller module.

Controller pair

Two SPC810ev modules provide the primary and backup controller positions. Their configuration and redundancy state are maintained as a paired system.

Serial adapters

Two PBA812 process-bus adapters provide the RS232/485 serial route used with supported termination equipment. PBA811 is associated with HN800 rather than this serial kit.

Kit accessories

TER800 terminators and the redundant link kit complete the ordered arrangement. Receiving inspection checks the bundle contents as well as the controller labels.

Practical checks

Product Q&A

Why can ABB SPC810e / SPC810ev / SPC810ev2K02 not share one spare record?

ABB SPC810e / SPC810ev / SPC810ev2K02 use different mounting and bundle definitions. Keep Evolution, Harmony Rack and redundant serial-kit identities separate even though the processor platform is related.

When is PBA812 required for ABB SPC810e / SPC810ev / SPC810ev2K02?

Within ABB SPC810e / SPC810ev / SPC810ev2K02, PBA812 is used for the SPC810ev serial path to RS232/485 devices. HN800 arrangements normally use PBA811, so confirm the connected bus before ordering.

What should be counted when receiving ABB SPC810e / SPC810ev / SPC810ev2K02?

For ABB SPC810e / SPC810ev / SPC810ev2K02, inspect the requested controller form and, for SPC810ev2K02, verify two SPC810ev modules, two PBA812 adapters, terminators and the redundant link components.

Why might the backup controller of ABB SPC810e / SPC810ev / SPC810ev2K02 not synchronize?

On ABB SPC810e / SPC810ev / SPC810ev2K02, compare firmware, configuration, redundancy-link cabling, terminators and controller health. A matched module label does not prove the paired state is synchronized.

How should mounting clearance be checked for ABB SPC810e / SPC810ev / SPC810ev2K02?

Use the form-factor dimensions and base/MMU arrangement specified for ABB SPC810e / SPC810ev / SPC810ev2K02. The redundant kit consumes two adjacent Harmony Rack slots and must be checked as an assembly.

What isolates a serial-device fault from an ABB SPC810e / SPC810ev / SPC810ev2K02 controller fault?

For ABB SPC810e / SPC810ev / SPC810ev2K02, verify the PBA812 channel, NTMP termination, RS232/485 mode, framing and device response before exchanging the controller pair.

Moore Automation

Customer Support

Moore Automation

https://www.mvme.cn

Moore Automation can structure enquiries for modules, mounting hardware and bundled controller kits so each required component remains visible. This is particularly useful when a family name covers both loose modules and redundant assemblies.

A single contact can align requested documentation, quotation details and shipment checkpoints while preserving the customer’s original controller and kit terminology.

Bundle-content clarificationAccessory-line coordinationDocumentation follow-upSingle-contact continuity

Mixed-brand selection

Recommended Models

Siemens ASI533

Motorola MVME2700

ABB R-2000IB/165F

Siemens EB402

Motorola MVME5100

ABB 3HNA024871-001

Siemens A2FV70S

Motorola MVME5110

ABB R-2000IB/210F

Siemens SD834

Motorola MVME5500

ABB TU848

Siemens SS832

ABB R-2000IB/210WE

Siemens AAR145

ABB MTB-02

Siemens ARS55M

ABB TU842

Siemens ASR133

ABB 3HNA009724-001

Siemens SS823

ABB CM575-DN

Siemens SD833

ABB TU845

Siemens AFV10S

ABB 3HNA006145-001

Siemens DP820

ABB DSQC3120A

Siemens ARS15M

ABB DSQC639

Siemens DP865

ABB KPP600-20-2X40

Siemens A2FV50S

ABB 3HNA024941-001

Siemens AFV30S

ABB 3HEA802988-001

Siemens AFV40S

ABB 3HNA013638

Siemens ASD143

ABB DSQC663

Siemens SD832

ABB PIB-03

Siemens TP830

ABB DSQC1018

Siemens TP831

ABB DSQC1024

Siemens TB851

ABB 3HNA012283-001

Siemens TB852

ABB 3HNA026682-001

Siemens 6FM1470-3CA25

ABB TU838

Siemens 6DL1134-6TH00-0PH1

ABB PDB-03

Siemens 6ES7677-2VB42-0GB0

ABB 3HNA031165-00

Siemens 6AV2124-0MC24-1AX0

ABB DSQC406

Siemens 6ES7134-7TD50-0AB0

ABB 50817-0128L05

Direct enquiry

Enquiry Details

CompanyMoore Automation

Sales ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	ABB SPC810e / SPC810ev / SPC810ev2K02 Symphony Plus Process Controllers
Item NO.	2932013
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	ABB
Brand	ABB
Creation Time	2026-11-12

ABB SPC810e / SPC810ev / SPC810ev2K02 Symphony Plus Process Controllers Item NO.: 2932013

ABB SPC810e / SPC810ev / SPC810ev2K02 Symphony Plus Process Controllers

Product Details

Specifications Overview

Controller Form Factors

SPC810e mounting

SPC810ev mounting

Selection boundary

Redundant Serial Kit Composition

Controller pair

Serial adapters

Kit accessories

Product Q&A

Customer Support

Moore Automation

Recommended Models

Enquiry Details

You May Also Like