Grouped field state
Current-sinking transitions enter one of two eight-channel groups. Keeping the field supply and return organized by group makes a shared wiring fault distinguishable from an individual point change.
ABBS800 I/O
Digital input · Sequence of Events
ABB DI831 3BSE013212R1 48 V DC Digital Input Module
01
Product Information
ABB DI831 3BSE013212R1 is an S800 I/O 16-channel 48 V DC digital input module. It receives current-sinking field states, presents them to the S800 station through ModuleBus and supports Sequence of Events recording where the controller project preserves the event path.
The input circuits of ABB DI831 3BSE013212R1 are divided into two isolated groups of eight channels. Each group keeps its field wiring together while the module transfers channel state and event information to the I/O system, so a supply or return problem affecting one group can be separated from conditions on the other group.
Installed on a documented S800 mounting termination unit, ABB DI831 3BSE013212R1 uses the MTU for field termination and mechanical seating while ModuleBus carries module power and data. The compatible MTU list therefore belongs to installation planning, and commissioning must verify module recognition, one point from each group and the expected SOE record before the complete input set is accepted.
02
Technical Specifications
Exact-model engineering record
| Brand | ABB |
|---|---|
| Model | DI831 3BSE013212R1 |
| Product Name | S800 I/O 16-channel 48 V DC digital input module with SOE |
| Country | Switzerland |
| System Family | S800 I/O |
| Input Signal | 48 V DC, current-sinking digital input |
| Number of Channels | 16 |
| Channel Organization | Two isolated groups of 8 channels |
| Sequence of Events | Supported; event-recording resolution below 0.5 ms |
| Compatible MTUs | TU810, TU812, TU814, TU818, TU830, TU833, TU838 and TU850 |
| ModuleBus Current | +5 V: 100 mA typical, 120 mA maximum; +24 V: 0 mA |
| Feature Flags | HART: no; redundancy: no; high integrity: no; intrinsic safety: no |
| Compliance | EU, UAE and China RoHS; WEEE Directive 2012/19/EU |
| Dimensions (W × H × D) | 45 × 119 × 102 mm; 111 mm depth including connector |
| Weight | 0.22 kg |
03
Monitoring and Control
ABB DI831 3BSE013212R1 keeps ordinary channel state, grouped field wiring and time-ordered event handling connected as one input path without treating the module as a safety or redundant input device.
ModuleBus transfer
The module converts each accepted field condition into input data for the S800 station. ModuleBus carries the point state and module information to the controller without using a separate field communication port.
Event-order check
SOE handling records input transitions with sub-millisecond resolution. A valid commissioning test confirms event order from both channel groups and checks that controller time handling has not reduced the points to ordinary scan-only indications.
04
Installation Highlights
01
Confirm the termination unit
Match the cabinet plan to TU810, TU812, TU814, TU818, TU830, TU833, TU838 or TU850, confirm the intended module position and complete all work with field and station power de-energized.
02
Land the two channel groups
Terminate the 48 V current-sinking circuits in their documented eight-channel groups. Preserve each group supply and return route, then check conductor identification before seating ABB DI831 3BSE013212R1 on the MTU.
03
Restore power and prove the path
Confirm that the S800 station recognizes the exact module and project position. Exercise one known input from each group, then review both the channel indication and the SOE record before expanding the test to the remaining points.
05
Product Questions
How do I confirm that ABB DI831 3BSE013212R1 is the correct 48 V input module?
Match the complete article string ABB DI831 3BSE013212R1, the 48 V DC current-sinking input requirement and the 16-channel arrangement. A nearby S800 I/O model can share the enclosure format while using a different voltage, integrity or redundancy design.
Why can eight points fail together on ABB DI831 3BSE013212R1 while the other eight still operate?
The channels of ABB DI831 3BSE013212R1 are arranged as two isolated groups of eight. Check the field supply, return path and terminal wiring for the affected group before treating sixteen simultaneous point faults as a failed module.
Which termination units can be prepared before installing ABB DI831 3BSE013212R1?
ABB DI831 3BSE013212R1 is documented with TU810, TU812, TU814, TU818, TU830, TU833, TU838 and TU850. Keep the selected MTU article with the cabinet drawing so its termination style and physical keying are verified before field conductors are landed.
How should Sequence of Events be commissioned for ABB DI831 3BSE013212R1?
After ABB DI831 3BSE013212R1 is recognized on ModuleBus, transition a known point in each eight-channel group and confirm that the controller receives the channel state and SOE record in the expected order. Controller time synchronization and project handling must remain active for event timing to be meaningful.
What should be checked when replacing an existing ABB DI831 3BSE013212R1?
For ABB DI831 3BSE013212R1, verify the complete article number, MTU, module position, project configuration and both channel-group wiring records before power is restored. Then test one input from each group instead of accepting only a healthy module indication.
Can ABB DI831 3BSE013212R1 be used where redundant or safety-rated inputs are required?
No. ABB DI831 3BSE013212R1 is identified as a standard S800 I/O input with no redundancy, high-integrity or intrinsic-safety option. A project that requires those functions needs the specifically documented ABB input module rather than treating DI831 as an interchangeable substitute.
06
Brand Supply Scope
Moore Automation
https://www.mvme.cn/Moore Automation organizes industrial automation enquiries across PLC, DCS, HMI, I/O, drive and machinery-monitoring product families from multiple established brands.
For an exact record such as ABB DI831 3BSE013212R1, the manufacturer, full model, requested quantity and destination remain connected to the same enquiry so the requested module is not confused with a nearby S800 I/O variant.
Control platformsPLC, DCS and distributed I/O records.
Multi-brand rangeABB and other industrial automation brands.
Record continuityModel, quantity and destination kept together.
07
Recommended Products
ABBPM564-ETH 1SAP120900R0071
ABBDI810 3BSE008508R1
ABBDO810 3BSE008510R1
ABBAI810 3BSE008516R1
ABBAO810V2 3BSE038415R1
Allen-Bradley1756-IB16
Allen-Bradley1756-OB16E
Allen-Bradley1756-EN2T
Allen-Bradley1756-L83E
Allen-Bradley1769-IF8
Siemens6ES7131-6BF00-0BA0
Siemens6ES7132-6BH01-0BA0
Siemens6ES7155-6AU01-0BN0
Siemens6ES7511-1AK02-0AB0
Siemens6ES7521-1BL00-0AB0
Schneider ElectricBMXDDI1602
Schneider ElectricBMXDDO1602
Schneider ElectricBMXAMI0810
Schneider ElectricBMXNOE0100
Schneider ElectricBMXP342020
HoneywellCC-PAIH01
HoneywellCC-PAOH01
HoneywellCC-PDIL01
HoneywellCC-PDOB01
HoneywellFC-SDI-1624
Bently Nevada330180-91-05
Bently Nevada3500/22M 138607-01
Bently Nevada3500/42M 176449-02
Bently Nevada330103-00-05-10-02-00
Bently Nevada21504-00-12-10-02
GEIC695CPU310
GEIC695ETM001
GEIC694MDL645
GEIC694MDL740
GEIC200ALG240
EmersonKJ3001X1-BA1
EmersonKJ3222X1-BA1
EmersonKJ4001X1-CA1
EmersonVE3008
EmersonA6120 9199-00058
YokogawaADV151-P00
YokogawaADV551-P00
YokogawaAAI143-H00
YokogawaAAI543-H00
YokogawaALR121-S00
HIMAF3330
HIMAF6217
HIMAF8621A
HIMAX-DI 32 01
HIMAX-DO 24 01
B&RX20DI9371
B&RX20DO9322
B&RX20AI4632
B&RX20CP1586
B&RX20IF1082-2
BeckhoffEL1008
BeckhoffEL2008
BeckhoffEL3064
BeckhoffEK1100
BeckhoffCX9020
08
Contact Information
No related record found