ABB 3HAC058992-003 is the NTMF01 interface module in the ABB S800 I/O family. It belongs to the station interface layer, where the installed I/O assembly is organized for its controller-side data path.
01
Product Description
ABB 3HAC058992-003 is the NTMF01 interface module in the ABB S800 I/O family. It belongs to the station interface layer, where the installed I/O assembly is organized for its controller-side data path.
The role of ABB 3HAC058992-003 is defined by its position, terminal association and station wiring. The module record therefore stays linked to the adjacent I/O hardware and the controller configuration that expects the interface.
When replacing ABB 3HAC058992-003, the station is isolated, adjacent connectors are identified and the post-installation check confirms both local station status and controller communication.
02
Product Specifications
TECHNICAL ITEM
SPECIFICATION
BRAND
ABB
MODEL
3HAC058992-003
PRODUCT NAME
NTMF01 S800 interface module
COUNTRY
Sweden
PRODUCT TYPE
NTMF01 S800 interface module
I/O FAMILY
ABB S800
PRIMARY ROLE
Station interface organization
POSITION BASIS
Documented I/O station location
CONNECTION SIDE
Adjacent I/O hardware and ModuleBus
CONTROLLER PATH
Station data to controller
WIRING RECORD
Terminal and adjacent-module labels
REMOVAL CONDITION
Station isolated
STATUS CHECK
Local station indication
COMMISSIONING CHECK
Controller communication
SERVICE IDENTITY
NTMF01 / 3HAC058992-003
03
System Integration
ABB 3HAC058992-003 links the installed S800 station structure to its controller-side data path, so adjacent modules and the interface position are part of the match.
01
Adjacent-module order
The interface is fitted in the documented relationship to neighboring S800 modules.
02
Bus continuity
The station bus path is checked from the interface through the connected I/O assembly.
03
Controller hand-off
The controller must receive the expected station identity after the interface is restored.
04
Installation Highlights
Installation of ABB 3HAC058992-003 is controlled around module order, connector seating and station restart.
01
Mark the position
Record the NTMF01 position and neighboring module order before removal.
02
Seat the interface
Reconnect the station and bus connectors without changing their orientation.
03
Verify the station
Restart under controlled conditions and confirm local and controller-side status.
05
Common Questions
01
What does ABB 3HAC058992-003 connect?
ABB 3HAC058992-003 connects the documented S800 station structure to its controller-side data path through the installed interface and bus arrangement.
02
Why must adjacent modules be recorded before removing ABB 3HAC058992-003?
The position and neighboring order define the station interface context for ABB 3HAC058992-003.
03
What should be checked if ABB 3HAC058992-003 has no station response?
Check connector orientation, bus continuity and the documented module position for ABB 3HAC058992-003 before changing controller configuration.
04
How should ABB 3HAC058992-003 be installed?
Isolate the station, refit ABB 3HAC058992-003 in its recorded position, restore connectors and verify local then controller status.
05
Can the NTMF01 record be moved to another S800 position for ABB 3HAC058992-003?
Only the documented position for ABB 3HAC058992-003 should be used; a different position changes the station wiring context.
06
What information helps identify ABB 3HAC058992-003?
Use the complete ABB 3HAC058992-003 string, station position, adjacent modules and connector photographs.
Moore Automation records discontinued or difficult-to-source identifiers with their suffixes, photographs and destination requirements without implying guaranteed availability.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found